Einhell TC-TS 254 - Инструкция по эксплуатации - Страница 26

GB

- 26 -

• 

Saw blade guard / splitter 

• 

Push stick

• 

Parallel stop

• 

Hand wheel

• 

Crank arm

• 

Rubber foot (4x)

• 

Cross stop

• 

Screw for parallel stop (2x)

• 

Stop rail for parallel stop

• 

Knurled screw for parallel stop (2x)

• 

Leg (4x)

• 

Cross strut (4x)

• 

Additional leg (2x)

• 

Wrench, size 10/13 mm

• 

Wrench, size 10 mm

• 

Hex screw (8x)

• 

Washer, large (8x)

• 

Lock bolt (8x)

• 

Washer, small (12x)

• 

Spring washer (8x)

• 

Nut (12x)

• 

Screw with washer and spring washer (4x)

• 

Original operating instructions

• 

Safety information

3. Proper use

The bench-type circular saw is designed for the 

slitting and cross-cutting (only with the cross 

stop) of all types of timber commensurate with the 

machine‘s size. The equipment is not to be used 

for cutting any type of round wood.

The equipment is to be used only for its prescri-

bed purpose. Any other use is deemed to be a 

case of misuse. The user / operator and not the 

manufacturer will be liable for any damage or inju-

ries of any kind caused as a result of this.

Please note that our equipment has not been de-

signed for use in commercial, trade or industrial 

applications. Our warranty will be voided if the 

machine is used in commercial, trade or industrial 

businesses or for equivalent purposes.

The equipment is to be operated only with suita-

ble saw blades (saw blades made of HM or CV) 

It is prohibited to use any type of HSS saw blade 

and cutting-o

ff

  wheel.

To use the equipment properly you must also 

observe the safety information, the assembly 

instructions and the operating instructions to be 

found in this manual.

All persons who use and service the equipment 

have to be acquainted with these operating 

instructions and must be informed about the 

equipment‘s potential hazards. It is also imperati-

ve to observe the accident prevention regulations 

in force in your area. The same applies for the 

general rules of health and safety at work.

The manufacturer will not be liable for any chan-

ges made to the equipment nor for any damage 

resulting from such changes. Even when the 

equipment is used as prescribed it is still impossi-

ble to eliminate certain residual risk factors.

The following hazards may arise in connection 

with the machine‘s construction and design:

• 

Contact with the saw blade in the uncovered 

saw zone.

• 

Reaching into the running saw blade (cut 

injuries).

• 

Kick-back of workpieces and parts of work-

pieces.

• 

Saw blade fracturing.

• 

Catapulting of faulty carbide tips from the saw 

blade.

• 

Damage to hearing if essential ear-muffs are 

not used.

• 

Harmful emissions of wood dust when used 

in closed rooms.

4. Technical data

AC motor  ..................................220-240V ~ 50Hz
Power P  ..................S1 1800 W · S6 40% 2050 W
Idling speed n

0

  ..................................... 4250 rpm

Carbide saw blade  .......... Ø 254 x Ø 30 x 2.4 mm
Number of teeth ............................................... 24
Table size  ...................................... 580 x 555 mm
Cutting height max. ........................... 80 mm / 90°

  ........................................................  55 mm / 45°
Height adjustment  .................... in

fi

 nite 0 - 80 mm

Tilting saw blade  .......................... in

fi

 nite 0° - 45°

Cross stop angle  ....................... in

fi

 nite -45° - 45°

Extractor connection  ............................. Ø 36 mm
Weight  ........................................  approx. 19.1 kg
Protection class:  ...........................................  II/

쓑

Thickness of the splitter  .......................... 2.0 mm

Anl_TC_TS_254_ECO_SPK9.indb   26

Anl_TC_TS_254_ECO_SPK9.indb   26

25.10.2019   10:22:49

25.10.2019   10:22:49