Bosch GKS 235 Turbo Professional - Инструкция по эксплуатации - Страница 18

18

 | English

1 609 92A 4BS | (12.09.2018)

Bosch Power Tools

The sawing performance and the quality of the cut essen-
tially depend on the condition and the tooth shape of the
saw blade. This is why you should only use sharp saw blades
that are suitable for the material being machined.

Sawing wood

Choosing the right saw blade depends on the wood type,
wood quality and whether cuts with or against the grain are
required.
Making cuts in spruce with the grain produces long, spiral-
shaped chips.
Beech and oak dust is especially detrimental to health.
Therefore, work only with dust extraction.

Sawing with a parallel guide (see figure D)

The parallel guide 

(11)

 allows you to make precise cuts

along the edge of a workpiece and cut strips with the same
dimensions.
Loosen the wing bolt 

(8)

 and slide the scale of the parallel

guide 

(11)

 through the guide in the base plate 

(14)

. Adjust

the desired cutting width as a scale value at the correspond-
ing 

(10)

 or 

(9)

 cut mark, see the section "Cut marks".

Retighten the wing bolt 

(8)

.

Sawing with an auxiliary guide (see figure E)

For working on large workpieces or for cutting straight
edges, you can securely fasten a board or rail to the work-
piece as an auxiliary guide. The circular saw can be guided
along the path of this auxiliary guide with the base plate.

Maintenance and Servicing

Maintenance and cleaning

u

Pull the plug out of the socket before carrying out any
work on the power tool.

u

To ensure safe and efficient operation, always keep
the power tool and the ventilation slots clean.

In order to avoid safety hazards, if the power supply cord
needs to be replaced, this must be done by Bosch or by a
customer service centre that is authorised to repair Bosch
power tools.
The retracting blade guard must always be able to move
freely and retract automatically. It is therefore important to
keep the area around the retracting blade guard clean at all
times. Remove dust and chips by blowing out with com-
pressed air or using a brush.
Non-coated saw blades can be protected against corrosion
using a thin layer of acid-free oil. Remove the oil again before
sawing as failure to do so will stain the wood.
Resin or glue residue on the saw blade has a detrimental ef-
fect on the quality of the cut. You should therefore clean saw
blades straight after use.

After-sales service and advice on using products

Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: 

www.bosch-pt.com

The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.

Great Britain

Robert Bosch Ltd. (B.S.C.) 
P.O. Box 98 
Broadwater Park 
North Orbital Road 
Denham Uxbridge
UB 9 5HJ 
At 

www.bosch-pt.co.uk

 you can order spare parts or ar-

range the collection of a product in need of servicing or re-
pair. 
Tel. Service: (0344) 7360109 
E-Mail: boschservicecentre@bosch.com

Ireland

Origo Ltd. 
Unit 23 Magna Drive 
Magna Business Park 
City West 
Dublin 24 
Tel. Service: (01) 4666700 
Fax: (01) 4666888

Australia, New Zealand and Pacific Islands

Robert Bosch Australia Pty. Ltd. 
Power Tools 
Locked Bag 66 
Clayton South VIC 3169 
Customer Contact Center 
Inside Australia: 
Phone: (01300) 307044 
Fax: (01300) 307045
Inside New Zealand: 
Phone: (0800) 543353 
Fax: (0800) 428570
Outside AU and NZ: 
Phone: +61 3 95415555 
www.bosch-pt.com.au 
www.bosch-pt.co.nz

Republic of South Africa
Customer service

Hotline: (011) 6519600

Gauteng – BSC Service Centre

35 Roper Street, New Centre 
Johannesburg 
Tel.: (011) 4939375 
Fax: (011) 4930126 
E-mail: bsctools@icon.co.za

KZN – BSC Service Centre

Unit E, Almar Centre 
143 Crompton Street 
Pinetown 
Tel.: (031) 7012120