Ryobi R18SDS-0 - Инструкция по эксплуатации - Страница 4

English

2

RISK REDUCTION

It has been reported that vibrations from hand-held tools 
may contribute to a condition called Raynaud’s Syndrome 
in certain individuals. Symptoms may include tingling, 
numbness and blanching of the fingers, usually apparent 
upon exposure to cold. Hereditary factors, exposure to 
cold and dampness, diet, smoking and work practices 
are all thought to contribute to the development of these 
symptoms. There are measures that can be taken by the 
operator to possibly reduce the effects of vibration:

■

Keep your body warm in cold weather. When operating 
the unit wear gloves to keep the hands and wrists 
warm. It is reported that cold weather is a major factor 
contributing to Raynaud’s Syndrome.

■

After each period of operation, exercise to increase 
blood circulation.

■

Take frequent work breaks. Limit the amount of 
exposure per day.

If you experience any of the symptoms of this condition, 
immediately discontinue use and see your doctor about 
these symptoms.

 WARNING

Injuries may be caused, or aggravated, by prolonged 
use of a tool. When using any tool for prolonged periods, 
ensure you take regular breaks.

MAINTENANCE

 WARNING

The product should never be connected to a power supply 
when you are assembling parts, making adjustments, 
cleaning, performing maintenance, or when the product 
is not in use. Disconnecting the product will prevent 
accidental starting that could cause serious injury.

 WARNING

When servicing use only identical Ryobi replacement 
parts. Use of any other parts may create a hazard or 
cause product damage.

■

Avoid using solvents when cleaning plastic parts. Most 
plastics are susceptible to various types of commercial 
solvents and may be damaged by their use. Use clean 
cloths to remove dirt, carbon dust, etc.

■

Do not use compressed air to blow dust / dirt from any 
power tool. Serious eye injury could result. Use a cloth, 
brush or vacuum to remove dust and dirt.

 WARNING

Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact 
with plastic parts. They contain chemicals that can 
damage, weaken or destroy plastic.

■

Electric tools used on fiberglass material, wallboard, 
spackling compounds, or plaster are subject to 
accelerated wear and possible premature failure 
because the fiberglass chips and grindings are highly 
abrasive to bearings, brushes, commutators, etc. 
Consequently, we do not recommend using this tool for 
extended work on these types of materials.

 WARNING

Always wear safety goggles or safety glasses with side 
shields during power tool operation or when blowing 
dust. If operation is dusty, also wear a dust mask.

■

For greater safety and reliability, all repairs should be 
performed by an authorised Ryobi service centre.

LUBRICATION

All of the bearings in the product are lubricated with a 
sufficient amount of high grade lubricant for the life span of 
the product under normal operating conditions. Therefore, 
no further lubrication is required.

ENVIRONMENTAL PROTECTION

Recycle raw materials instead of disposing 
of as waste. The machine, accessories 
and packaging should be sorted for 
environmental-friendly recycling.

SYMBOLS

Safety alert

No-load speed

CE conformity

EurAsian Conformity Mark.

Please read the instructions carefully 
before starting the machine.