Makita M8701 - Инструкция по эксплуатации - Страница 6

6 ENGLISH

Service

1. 

Have your power tool serviced by a qualified 

repair person using only identical replacement 

parts.

 This will ensure that the safety of the power 

tool is maintained.

2. 

Follow instruction for lubricating and chang-

ing accessories.

3. 

Keep handles dry, clean and free from oil and 

grease.

ROTARY HAMMER SAFETY 

WARNINGS

1. 

Wear ear protectors.

 Exposure to noise can 

cause hearing loss.

2. 

Use auxiliary handle(s), if supplied with the 

tool.

 Loss of control can cause personal injury.

3. 

Hold power tool by insulated gripping sur-

faces, when performing an operation where 

the cutting accessory may contact hidden wir-

ing or its own cord.

 Cutting accessory contacting 

a "live" wire may make exposed metal parts of the 

power tool "live" and could give the operator an 

electric shock.

4. 

Wear a hard hat (safety helmet), safety glasses 

and/or face shield. Ordinary eye or sun glasses 

are NOT safety glasses. It is also highly recom-

mended that you wear a dust mask and thickly 

padded gloves.

5. 

Be sure the bit is secured in place before 

operation.

6. 

Under normal operation, the tool is designed 

to produce vibration. The screws can come 

loose easily, causing a breakdown or accident. 

Check tightness of screws carefully before 

operation.

7. 

In cold weather or when the tool has not been 

used for a long time, let the tool warm up for 

a while by operating it under no load. This 

will loosen up the lubrication. Without proper 

warm-up, hammering operation is difficult.

8. 

Always be sure you have a firm footing. Be 

sure no one is below when using the tool in 

high locations.

9. 

Hold the tool firmly with both hands.

10. 

Keep hands away from moving parts.

11. 

Do not leave the tool running. Operate the tool 

only when hand-held.

12. 

Do not point the tool at any one in the area 

when operating. The bit could fly out and 

injure someone seriously.

13. 

Do not touch the bit, parts close to the bit, or 

workpiece immediately after operation; they 

may be extremely hot and could burn your 

skin.

14. 

Some material contains chemicals which may 

be toxic. Take caution to prevent dust inhala-

tion and skin contact. Follow material supplier 

safety data.

15. 

Do not touch the power plug with wet hands.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity 

with product (gained from repeated use) replace 

strict adherence to safety rules for the subject 

product. MISUSE or failure to follow the safety 

rules stated in this instruction manual may cause 

serious personal injury.

FUNCTIONAL 

DESCRIPTION

CAUTION:

Always be sure that the tool is 

switched off and unplugged before adjusting or 

checking function on the tool.

Switch action

CAUTION:

Before plugging in the tool, always 

check to see that the switch trigger actuates 

properly and returns to the "OFF" position when 

released.

CAUTION:

Switch can be locked in “ON” posi-

tion for ease of operator comfort during extended 

use. Apply caution when locking tool in “ON” 

position and maintain firm grasp on tool.

► 

Fig.1:

1.

 Switch trigger 

2.

 Lock button

To start the tool, simply pull the switch trigger. Tool 

speed is increased by increasing pressure on the switch 

trigger. Release the switch trigger to stop.
For continuous operation, pull the switch trigger, push 

in the lock button and then release the switch trigger. 

To stop the tool from the locked position, pull the switch 

trigger fully, then release it.

Reversing switch action

CAUTION:

Always check the direction of 

rotation before operation.

NOTICE:

Use the reversing switch only after the 

tool comes to a complete stop.

 Changing the direc-

tion of rotation before the tool stops may damage the 

tool.

NOTICE:

When changing the direction of rota-

tion, be sure to fully set the reversing switch to 

position   (A side) or   (B side).

 Otherwise, when 

the switch trigger is pulled, the motor may not rotate 

or the tool may not work properly.

► 

Fig.2:

1.

 Reversing switch lever

This tool has a reversing switch to change the direc-

tion of rotation. Move the reversing switch lever to the 
position   (A side) for clockwise rotation or to the posi-
tion   (B side) for counterclockwise rotation.