Makita DHR182ZWJ - Инструкция по эксплуатации - Страница 11

11 ENGLISH

ENGLISH (Original instructions)

SPECIFICATIONS

Model:

DHR182

Capacities

Concrete

18 mm

Core bit

35 mm

Diamond core bit (dry type)

32 mm

Steel

13 mm

Wood

24 mm

No load speed

0 - 1,350 min

-1

Blows per minute

0 - 5,000 min

-1

Overall length

301 mm

Rated voltage

D.C. 18 V

Net weight

2.4 - 3.2 kg

Optional accessory

Model:

DX05

Suction performance

250 l/min

Operating stroke

Up to 90 mm

Suitable drill bit

Up to 160 mm

Net weight

0.9 kg

• 

Due to our continuing program of research and development, the specifications herein are subject to change 

without notice.

• 

Specifications and battery cartridge may differ from country to country.

• 

The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi

-

est combinations, according to EPTA-Procedure 01/2014, are shown in the table.

Applicable battery cartridge

BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 / BL1840B / BL1850 / BL1850B / BL1860B
• 

Some of the battery cartridges listed above may not be available depending on your region of residence.

WARNING:

Only use the battery cartridges listed above.

 Use of any other battery cartridges may cause 

injury and/or fire.

Intended use

The tool is intended for hammer drilling and drilling in 

brick, concrete and stone as well as for chiselling work. 

It is also suitable for drilling without impact in wood, 

metal, ceramic and plastic.

Noise

The typical A-weighted noise level determined accord-

ing to EN60745-2-6:

Model DHR182

Sound pressure level (L

pA

) : 89 dB(A)

Sound power level (L

WA

) : 100 dB (A)

Uncertainty (K) : 3 dB(A)

Model DHR182 with DX05

Sound pressure level (L

pA

) : 90 dB(A)

Sound power level (L

WA

) : 101 dB (A)

Uncertainty (K) : 3 dB(A)

NOTE:

 The declared noise emission value(s) has 

been measured in accordance with a standard test 

method and may be used for comparing one tool with 

another.

NOTE:

 The declared noise emission value(s) 

may also be used in a preliminary assessment of 

exposure.

WARNING:

Wear ear protection.

WARNING:

The noise emission during actual 

use of the power tool can differ from the declared 

value(s) depending on the ways in which the 

tool is used especially what kind of workpiece is 

processed.

WARNING:

Be sure to identify safety mea

-

sures to protect the operator that are based on an 

estimation of exposure in the actual conditions of 

use (taking account of all parts of the operating 

cycle such as the times when the tool is switched 

off and when it is running idle in addition to the 

trigger time).