Ardesto DMC-SA1212SB - Инструкция по эксплуатации - Страница 45

EN

45

Cleaning the removable inner lid

The removable inner lid and the sealing rubber are 

recommended to be cleaned after each use of the 

appliance� Rinse the cover thoroughly under running 

water; mild detergent may be used� The cleaning 

procedure is shown in diagram A3�

WARNING Be careful when cleaning the sealing rubber: its 

deformation will cause the device to malfunction.

Cleaning the removable steam valve (diagram A3). 

Clean the removable steam valve after each use�

1�  Remove the inner lid�

2�  Turn the steam valve counterclockwise and carefully 

remove it�

3�  Disassemble the steam valve�

4�  Rinse all parts of the steam valve under running water� 

Dry thoroughly before reassembling�

WARNING Do not rinse the valve under a strong water 

pressure. Watch out for small removable parts when 

cleaning the steam valve.

5�  When reassembling, align the «Closed Lock» symbol 

on the top of the valve with the «Open Lock» symbol 

on the end of the lower part and turn the upper part 

clockwise�

6�  Install the steam valve in the device�

Cleaning the Bowl

The bowl of the appliance should be cleaned after 

each use� You can clean the bowl by hand, using a soft 

sponge and dishwashing detergent, or in the dishwasher 

(according to the recommendations of its manufacturer)�

If heavily soiled, pour warm water into the bowl and 

leave it to soak for a while, then clean it�

Be sure to wipe the outer surface of the bowl dry before 

installing it in the body of the appliance�