Ardesto DMC-SA1212SB - Инструкция по эксплуатации - Страница 35

EN

35

Changing the temperature during the cooking process.

Cooking temperature variation range - from 35 to 180 °С with setting step of 1 °С�

1�  While the cooking program is running, press the «SETTINGS» button� The cooking 

temperature setting indicator will light up and the default temperature will flash on 

the display�

2�  Press the «

+

/

-

» buttons to set the desired temperature value� To quickly change the 

value, press and hold the corresponding button�

3�  Do not press the buttons on the control panel for a few seconds or press the 

«START» button: the changes will be saved automatically (the value on the display 

will stop flashing)�

4�  Press the «SETTINGS» button to go to the setting of the cooking time�

To protect against overheating, if the cooking temperature is set above 149°C, the 

maximum cooking time will be limited to two hours.

Changing the time during the cooking process.

The range and step of the cooking time varies depending on the selected program (see 

Summary table of automatic programs)�

1�  While the cooking program is running, press the «SETTINGS» button twice, the 

clock value on the display will start flashing�

2�  Press the 

+

/

-

 buttons to set the desired time value� Switching is done in a circle, 

press and hold the corresponding button to change the value quickly�

3�  Press the «SETTINGS» button to save your changes and move to the minute setting�

4�  Set the minutes in the same way� Do not press the buttons on the control panel for 

a few seconds or press the «START» button: the changes will be saved automatically 

(the value on the display will stop flashing)� To return to the clock setting, press the 

«SETTINGS» button again� Pressing the «SETTINGS» button again will return the 

unit to the temperature setting mode�

If you set the cooking time to 00:00, the program will stop and the display will show 

«End» for a few seconds.

The setting is not available during the «RICE» program.

If the temperature or cooking time is changed while the program is in progress (if this 

is the factory setting), the preheating process will be interrupted and the countdown of 

the program will start.

Auto-heating or keep warm function (maintaining the temperature of the cooked 

food).

This function starts automatically as soon as the cooking program finishes and can 

maintain the temperature of the cooked food at 70-75°C for up to 12 hours� When 

auto-heat is active, the auto-heat/reheat indicator lights, the «CANCEL» and «START» 

buttons, and the selected pan are lit, and the display shows a direct per-minute 

countdown of the operating time in this mode�

To turn off the auto-heat, press and hold the «CANCEL» button� The appliance switches 

to standby mode�

This function is not available in all programs (see Summary table of automatic cooking 

programs).