Мультиметры BENNING MM 1-3 044083 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
12
Operating manual
BENNING MM 1‑1/ 1‑2/ 1‑3
Digital multimeter for
- DC voltage measurements
- AC voltage measurements
- DC current measurements (BENNING MM 1-2/ 1-3)
- AC current measurements (BENNING MM 1-2/ 1-3)
-
resistance measurements
-
diode tests
-
continuity tests
- capacity measurements (BENNING MM 1-2/ 1-3)
- frequency measurements (BENNING MM 1-2/ 1-3)
- temperature measurements (BENNING MM 1-3)
Table of contents
1. User instructions
2. Safety instructions
3. Scope of delivery
4. Device description
5. General information
6. Ambient conditions
7. Electrical specifications
8. Measuring with the BENNING MM 1‑1/ 1‑2/ 1‑3
9. Maintenance
10. Using the folding support and the suspension fixture
11. Technical data of measuring accessories
12. Environmental note
1. User information
This operating manual is intended for
- skilled electricians and
- electrotechnically trained personnel.
The BENNING MM 1-1/ 1-2/ 1-3 is intended for measurements under dry am-
bient conditions. It must not be used in electrical circuits with a nominal voltage
higher than 1000 V DC and 750 V AC (see section 6 „Ambient conditions“ for
details).
The following symbols are used in this operating manual and on the
BENNING MM 1-1/ 1-2/ 1-3:
Warning of electrical danger!
Indicates instructions which must be followed to avoid danger to
persons.
Important, must comply with documentation!
This symbol indicates that the information provided in the operating
manual must be complied with in order to avoid risks.
This symbol on the BENNING MM 1-1/ 1-2/ 1-3 indicates that the
BENNING MM 1-1/ 1-2/ 1-3 is equipped with protective insulation
(protection class II).
This symbol on the BENNING MM 1-2/ 1-3 indicates built-in fuses.
This symbol appears on the display to indicate a discharged battery.
This symbol designates the „diode test” range.
This symbol designates the “continuity test“ field.
The buzzer is intended for acoustic result output.
This symbol indicates the „capacity test“ field.
(DC) Direct voltage or current
(AC) Alternating voltage or current
Ground (voltage against ground).
03/ 2019
BENNING MM 1-1/ 1-2/ 1-3
