MSI Z490-A PRO - Инструкция по эксплуатации - Страница 53

43

UEFI BIOS

▶ Extreme Memory Profile (XMP) [Disabled]

XMP (Extreme Memory Profile) is the overclocking technology by memory module. 

Please enable XMP or select a profile of memory module for overclocking the 

memory. This item will be available when the memory modules that support 

XMP

 is 

installed.

▶

DRAM Reference Clock [Auto]*

Sets the DRAM reference clock. The valid value range depends on the installed CPU. 

This item appears when a CPU that supports this adjustment is installed. 

▶

DRAM Frequency [Auto]

Sets the DRAM frequency. Please note the overclocking behavior is not guaranteed.

▶

Adjusted DRAM Frequency

Shows the adjusted DRAM frequency. Read-only.

▶

Load Memory Presets [Disabled]* 

Load OC Memory Preset will optimize the timing, voltage of installed memory module. 

▶

Memory Try It ! [Disabled]

It can improve memory compatibility or performance by choosing optimized memory 

preset.

▶

DRAM Timing Mode [Link]

Selects the memory timing mode.

[Link] 

Allows user to configure the DRAM timing for all memory channel.

[UnLink] 

Allows user to configure the DRAM timing for respective memory 

channel. 

▶ Advanced DRAM Configuration

Press 

Enter

 to enter the sub-menu. User can set the memory timing for each/ all 

memory channel. The system may become unstable or unbootable after changing 

memory timing. If it occurs, please clear the CMOS data and restore the default 

settings. (Refer to the Clear CMOS jumper/ button section to clear the CMOS data, and 

enter the BIOS to load the default settings.)

▶

Memory Fast Boot [Auto] *

Enables or disables the initiation and training for memory every booting.
[Auto] 

The setting will be configured automatically by BIOS.

[Enabled]  

System will completely keep the archives of first intiation and training 

for memory. So the memory will not be initialed and trained when 

booting to accelerate the system booting time.

[Disabled] 

The memory will be initialed and trained every booting.  

▶

DigitALL Power sub-menu

Press 

Enter

 to enter the sub-menu. In the sub-menu, you can setup some protecting 

conditions about voltage/ current/ temputure for CPU.

▶

CPU Core/ GT Voltage Mode [Auto]* 

Sets the CPU Core/ GT voltage mode.