MSI Z490-A PRO - Инструкция по эксплуатации - Страница 52

42

UEFI BIOS

▶

Core X X of X  xxxx MHz [Auto]

Allows you to set the CPU ratios for different number of active cores. These items only 

appear when 

CPU Ratio Apply Mode

 set to 

Per Core

.  

▶ Turbo Ratio Offset Value [Auto]

Sets the CPU Turbo ratio offset value. This item only appears when 

CPU Ratio Apply 

Mode

 set to 

Turbo Ratio Offset

.  

▶

CPU Ratio Mode [Dynamic Mode]*

Selects the CPU Ratio operating mode. This item will appear when you set the CPU 

ratio manually.
[Fixed Mode]   

Fixes the CPU ratio.  

[Dynamic Mode]   CPU ratio will be changed dynamically according to the CPU   

 loading.

▶ CPU Ratio Offset When Running AVX [Auto]

Sets a offset value to lower the CPU core ratio. It could be helpful for heat dissipation 

when running AVX instructions. When set to Auto, BIOS will configure this setting 

automatically. This item appears when the installed CPU supports this function.

▶

Ring Ratio [Auto]

Sets the ring ratio. The valid value range depends on the installed CPU. 

▶

Adjusted Ring Frequency 

Shows the adjusted Ring frequency. Read-only.

▶

GT Ratio [Auto]

Sets the integrated graphics ratio. The valid value range depends on the installed 

CPU. 

▶

Adjusted GT Frequency 

Shows the adjusted integrated graphics frequency. Read-only.

▶

+Misc Setting* 

Press Enter, + or - key to open or close the following items related to CPU features.   

▶

CPU Base Clock (MHz) [Default] 

Sets the CPU Base clock. You may overclock the CPU by adjusting this value. Please 

note that overclocking behavior and stability is not guaranteed. This item appears 

when a CPU that support this function is installed. 

▶

CPU Base Clock Apply Mode [Auto]* 

Sets the applying mode for adjusted CPU base clock. 
[Auto] 

This setting will be configured automatically by BIOS.

[Next Boot]   CPU will run the adjusted CPU base clock next boot. 

[Immediate]   CPU runs the adjusted CPU base clock immediately.

▶

Clockgen Features sub-menu

Press 

Enter

 to enter the sub-menu. Sets the detailed clockgen features.