Материнские платы GIGABYTE GA 945G DS3 rev 3 3 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
BIOS Setup
- 45 -
English
Full Thrust
Set C.I.A.2 to Full Thrust. (Automatically increase CPU frequency(17%,
19%) by CPU loading.
Warning: Stability is highly dependent on system components.
CPU Host Clock Control
Please note that if your system is overclocked and cannot restart, please wait 20secs.
for automatic system restart or clear the CMOS setup data and perform a safe restart.
Disabled
Disable CPU Host Clock Control. (Default value)
Enabled
Enable CPU Host Clock Control.
CPU Host Frequency (Mhz)
100 ~ 600
Set CPU Host Frequency from 100 MHz to 600 MHz.
If you use a 533 MHz FSB processor, set "CPU Host Frequency" to 133 MHz.
If you use an 800 MHz FSB processor, set "CPU Host Frequency" to 200 MHz.
If you use a 1066 MHz FSB processor, set "CPU Host Frequency" to 266 MHz.
Incorrect using it may cause your system broken. For power End-User use only!
PCI Express Frequency
Auto
Set PCI Express frequency automatically. (Default value)
SYC
PCI Express frequency SYC with CPU.
ASYC
Fix PCI Express frequency to 100 MHz.
System Memory Multiplier
The adjustable range will vary based on the CPU FSB. Default value: Auto (set memory
frequency by DRAM SPD data). Wrong frequency settings may cause system unable to boot.
Clear CMOS to overcome wrong frequency issue.
Memory Frequency (Mhz)
The values depend on
CPU Host Frequency (Mhz)
and
System Memory Multiplier
setting.
DIMM OverVoltage Control
Please note that by overclocking your system through the increase of the DIMM voltage, damage
to the memory may occur.
Normal
Supply DIMM voltage as DIMM required. (Default value)
+0.1V ~ +0.7V
Increase DIMM voltage by 0.1V to 0.7V.
PCI-E OverVoltage Control
Normal
Supply PCI-E voltage as PCI-E required. (Default value)
+0.1V ~ +0.3V
Increase PCI-E voltage by 0.1V to 0.3V.
FSB OverVoltage Control
Normal
Supply FSB voltage as FSB required. (Default value)
+0.1V ~ +0.3V
Increase FSB voltage by 0.1V to 0.3V.
CPU Voltage Control
Supports adjustable CPU vcore. The adjustable range is dependent on CPUs.
(Default value: Normal)
Please note that by overclocking your system through the increase of the CPU voltage, damage
to the CPU or decrease in the CPU life expectancy may occur.
Normal CPU Vcore
Display your CPU's normal voltage.
