Biostar B550MX/E PRO - Инструкция по эксплуатации - Страница 21

Chapter 3: UEFI BIOS & Software

 | 21

B550MX/E  PRO | B550MH/E PRO

Chapter 3: UEFI BIOS & Software

3.1 UEFI BIOS Setup

•   The BIOS Setup program can be used to view and change the BIOS settings for the 

computer. The BIOS Setup program is accessed by pressing the <DEL> key after the 

Power-On Self-Test (POST) memory test begins and before the operating system boot 

begins.

•   For further information of setting up the UEFI BIOS, please refer to the UEFI BIOS Manual 

on our website.

3.2 BIOS Update

The BIOS can be updated using either of the following utilities: 

•   BIOSTAR BIO-Flasher: Using this utility, the BIOS can be updated from a file on a hard 

disk, a USB drive (a flash drive or a USB hard drive), or a CD-ROM.

•   BIOSTAR BIOS Update Utility: It enables automated updating while in the Windows 

environment. Using this utility, the BIOS can be updated from a file on a hard disk, a USB 

drive (a flash drive or a USB hard drive), or a CD-ROM, or from the file location on the 

Web.

BIOSTAR BIO-Flasher

Note

»

   This utility only allows storage device with FAT32/16 format and single partition.

»

   Shutting down or resetting the system while updating the BIOS will lead to system boot failure.

Updating BIOS with BIOSTAR BIO-Flasher

1. Go to the website to download the latest BIOS file for the motherboard.

2. Then, copy and save the BIOS file into a USB flash (pen) drive.(Only supported FAT/FAT32 

format)

3. Insert the USB pen drive that contains the BIOS file to the USB port.

4. Power on or reset the computer and then press <F12> during the POST process.

5. After entering the POST screen, the BIO-FLASHER 

utility pops out. Choose <fs0> to search for the BIOS 

file.