JVC KD-G541 - Инструкция по эксплуатации - Страница 17

ENGLISH

17

5

  Use the Bluetooth device to search and 

connect.

On the device to be connected, enter the same 
PIN code you have just entered for this unit. 
“CONNECTED” appears on the display.
Now connection is established and you can use the 
device through the unit.

The device remains registered even after you 
disconnect the device. Use “CONNECT“ (or activate 
“AUTO CNNCT”) to connect the same device from 
next time on. (See the following and pages 19 
and 20.)

Connecting a device

Perform steps 

1

 and 

2

 on page 16, then...

1

  • 

Select “SEARCH” to search for available 
devices.

  The unit searches and displays the list of the 

available devices.

  If no available device is detected, “UNFOUND” 

appears.

• 

Select “SPECIAL” to connect a special 
device.

  The unit displays the list of the preset devices.

2

Select a device you want to connect.

3

  • 

For available devices...

  Enter the specific PIN code of the device to the 

unit.

  Refer to the instructions supplied with the device 

to check the PIN code.

  Use the Bluetooth device to connect.

  Now connection is established and you can use 

the device through the unit.

• 

For special device...

  Use “OPEN” or “SEARCH” to connect.

Connecting/disconnecting/deleting a 
registered device

1

Select “BT-PHONE” or “BT-AUDIO.”

2

Select a registered device you want to 
connect/disconnect/delete.

3

  • 

Select “CONNECT” or “DISCONNECT” to 
connect/disconnect the selected device.

• 

Select “DELETE,” then “YES” to delete the 
selected device.

You can set the unit to connect the Bluetooth device 
automatically when the unit is turned on. (See 
“AUTO CNNCT” on pages 19 and 20.)

Using the Bluetooth cellular 
phone 

~

Ÿ

  Enter the Bluetooth menu.

!

  Make a call or change the settings 

using the Bluetooth setting menu. 
(See pages 18, 19, and 20.)

Continued on the next page