Hyundai Electronics H-CMD4050G - Инструкция по эксплуатации - Страница 15

15

Operation

the nearest station upwards.

Band selection

Select RADIO mode. Press BAND/PTY 

button on the panel or BND/RDM button on 
the RC to select the desired band: FM1, FM2, 
FM3, AM1 (MW1), AM2 (MW2).

Manual/automatic tuning

•  Manual tuning: press SEEK-/

 and 

SEEK+/

 on the RC and hold for 2 seconds 

to enter the manual tuning mode. Press these 
buttons repeatedly to select a frequency 
downward or upward step by step.

•  Automatic tuning: press and hold PRESET 

/

 buttons on the panel or press SEEK-/

 and SEEK+/

 on the RC repeatedly, the 

automatic search will start. It will play when 
finds the station.

Programming tuner stations

There are numbered preset buttons on the 

RC (1~6), with which you can store and recall 
stations for each band (18 FM, 12 AM). Select 
a station, then press and hold a preset button. 
The station will be saved in the memory under 
the corresponding number. To recall a stored 
station, press the corresponding preset button 
or press PRESET 

/

 buttons on the panel.

Auto memory store/Preset scan

Auto store: Select a band, press and hold 

AS/PS/

 button on the panel or P.SCN/RPT 

button on the RC to enter auto store mode. 
The radio will automatically store 6 stations to 
the 6 preset memories of the current band. To 
stop auto store, press the button again.

  During auto station preset, the unit will 

search and store stations with the strong signal 
first, and then weaker signal stations until the 
memories are full.

Preset scan: Select a band, press AS/PS/

 button on the panel or P.SCN/RPT button 

on the RC to scan all preset stations in the 
memories of the current band. To stop preset 
scan, press the button again.

RDS function

RDS (Radio Data System) service availability 

varies with areas. Please understand if RDS 
service is not available in you area, the 
following service is not available, either.

AF (Alternative frequencies) function

Press AF/TA button on the RC to enable AF 

function. When the radio signal strength is poor, 
enabling the AF function will allow the unit to 
automatically search another station with the 
same PI (Program Identification) as the current 
station but with stronger signal strength.

  AF indicator on the display will flash until 

RDS information is received. If RDS service is 
not available in your area, turn off the AF mode.

TA (Traffic alarm) function

Press and hold MENU/TA button on the 

panel to activate the traffic alarm function.

When TA function is activated, it will search 

the station with TA information automatically. 
If there is no TA information, it will search the 
station with TP information automatically, if 
there is no TP information either, it will return to 
the previous station after searching.

When receiving the station with TP 

information but without TA information, 
TP icon is on and TA icon keeps blinking; 
when receiving the station with TP and TA 
information, both TP and TA icons are on.

When playing in other mode and TA 

information is received, it will change to the 
radio mode automatically. After playing over, it 
will return to the previous mode. Press and hold 
MENU/TA button on the panel once to ignore 
the received TA information, do it twice to turn 
off the function.

PTY (Program type) function

Press PTY button on the RC or press 

and hold BAND/PTY button on the panel to 
activate the PTY function, press it repeatedly 
to show Music group/Speech group/PTY off. 
Choose the needed PTY type by pressing the 
icon in the touchable screen or pressing the