Hyundai Electronics H-CMD4050G - Инструкция по эксплуатации - Страница 12

12

13

Operation

Operation

current mode information on the display.

Setting the sound characteristics

Press SEL button to open the following menu:

1

2

3 4

1. Setting list. Touch a setting to select its 

adjustment.

2. Adjustment buttons. Touch them to adjust 

corresponding setting.

3. Page selection buttons. Touch to select a 

menu page.

4. Return button. Touch to return to previous 

menu level.

Following settings are available for 

adjustment:

Page 1
•  Equalizer: Select Flat, Classic, Pop, Rock 

or DSP OFF equalizer mode.

•  TA volume: Adjust the volume level for TA 

radio service.

Page 2
•  Bass: Adjust the low-frequency level.
•  Treble: Adjust the high-frequency level.
•  Balance: Adjust the balance between left 

and right channels.

•  Fader: Adjust the balance between front 

and rear channels.

Page 3
•  Beep: Select ALL (beep is heard at any 

button pressing), 2ND (beep is heard when a 
button is pressed and held) or OFF (no beep).

•  Loud: Selecting loudness ON will 

emphasize the low frequency output.

•  Subwoofer: set the subwoofer on or off.

  You can also press 

/

 buttons on 

the RC to select menu pages; press UP/DOWN 
cursor buttons to select a setting, press LEFT/

RIGHT buttons to adjust the setting.

AV in jack

AV jack is intended to receive audio and video 

signals by connecting to external device.

Subwoofer

Connect a subwoofer to this unit using the 

Subwoofer output of this unit. For subwoofer 
operation an external amplifier is required.

Dual zone function

DUAL - dual zone function enabling user to 

listen to radio or watch TV in the front zone, 
and at the same time play audio or video from 
disc, USB or memory card.

For Dual zone an external monitor with is 

required having its own acoustic system and 
possibility of volume adjustment.

Press DUAL button to select between 

C-DUAL (buttons perform operations for the 
current mode of the front zone) or D-DUAL 
(buttons perform DVD functions).

System setup

When you select SETTING mode, the menu 

will be displayed, in which you can touch any 
item to select corresponding setting page:

After selecting a menu page you can 

navigate in the menu by pressing cursor 
buttons on the RC and confirm your selection 
by pressing ENTER button on the RC. Menu 
subpages are selected by pressing 

/

buttons on the RC. Or touch the items on the