Hyundai Electronics H-CMD4050G - Инструкция по эксплуатации - Страница 11

11

Operation

- - -

In the menu, touch the item of the mode you 

need to select the corresponding mode. Touch 
the arrow icon in the right part of the screen to 
switch between the 2 menu pages.

  The DVD, USB and SD modes are only 

available when a disc, USB or SD/MMC card is 
inserted into the unit.

Navigation (option)

•  To enable navigation mode, touch NAVI 

button in the main menu. To enable or disable 
NAVI mode you can also press and hold NAV/
MODE button on the panel.

•  Detach the front panel and insert the 

Navigation memory card into the mini Memory 
card slot of the unit before enabling navigation 
mode. The device will warn you if the memory 
card is not properly inserted into the card slot.

•  For more details about operations with 

navigation program, please read the instruction 
manual to the navigation software. You can 
download the quickstart guidance and full 
instruction manual for the navigation program 
from the web site of the navigation software 
manufacturer.

On-screen display (OSD)

Press OSD button on the RC to show the 

General operations

Touch screen

Due to the touch screen, you can fulfill most 

functions not only by pressing buttons but also 
by touching the options you need.

Reset the unit

Operating the unit for the first time or after 

replacing the car battery, you must reset the 
unit. Detach the front panel and then press 
RESET button (hole) under the panel to restore 
the unit to the original factory settings.

Power button

Press any button (except OPEN button and 

 button on the panel) to turn on the unit. 

Press POWER button on the RC or press and 
hold PWR/MUTE button on the panel to turn 
off the unit.

Monitor tilt angle

Press TILT button to adjust monitor title 

angle as follows: TILT1 => TILT2 => TILT3 
=> TILT4 => TILT5 => TILT6 => TILT7. The 
monitor will flip down accordingly.

Volume control

Press VOL+/- buttons on the RC or rotate 

VOL regulator on the panel to adjust the 
volume level.

Turning the sound off

When the power is on, press PWR/MUTE 

button on the panel or MUTE button on the RC 
to turn the sound off. Press it again or adjust 
volume to turn the sound on.

Mode selection

•  Repeatedly press MODE button on the RC 

or NAV/NODE button on the panel to select an 
operation mode.

•  In any mode press MENU button to display 

the Main menu consisting of two pages: