Hyundai Electronics H-CCR4701M - Инструкция по эксплуатации - Страница 12

12

Operation

Auto/Manual tuning

•  Automatic tuning: In Radio mode, touch 

and hold 

 or 

 button to adjust the 

radio frequency automatically. The radio will 
seek to the next or previous strong and clear 
frequency station automatically. Repeat this 
action to seek for other desired stations. To 
stop automatic search, press one of these 
buttons. Or press repeatedly shortly 

 or 

 button on the RC to manually adjust the 

radio frequency.

•  Manual tuning: Press repeatedly shortly 

 or 

 button on the RC to manually 

adjust the radio frequency.

Automatic store/preset scan

There are six numbered preset buttons on 

the the screen (P1-P6) which can store and 
recall stations for each band. While listening 
to a radio station you would like to save as a 
preset, touch and hold any key from P1-P6 
until you hear a beep. The station will be saved 
in the designated number.

Mono/Stereo control (in FM radio 

mode)

In FM radio mode, touch the ST button 

to select stereo or mono reception. ST ON 
means stereo reception of the signal; ST OFF 
means mono reception mode. Improvement 
of reception of distant stations can be done 
by selecting mono mode, which may cut down 
some reception noise.

Local radio station search

In radio mode, touch the LIST button and 

then the LOC button to select local or distance 
reception. LOC ON means that only local 
stations are received; LOC OFF means that 
both local and distant stations with weak and 
strong signal are received.

RDS function

RDS (Radio Data System) service 

availability varies with areas. Please 
understand if RDS service is not available in 

you area, the following service is not available, 
either.

AF (Alternative Frequencies) 

function

Press LIST button to show the function list; 

tap AF to select AF ON or AF OFF.

When the function is on, AF symbol will light 

up on the display.

When the radio signal strength is poor, 

enabling the AF function will allow the unit to 
automatically search another station with the 
same PI (Program Identification) as the current 
station but with a stronger signal, so that you 
do not have to retune the stations when driving 
between different transmitter coverage areas.

PS (Program Service name): the name of 

station will be display instead of frequency.

If RDS service is not available in your area, 

turn off the AF mode.

TA (Traffic Alarm) function

Press LIST button to show the function list; 

tap TA to select TA ON or TA OFF.

When TA is on, the TA symbol will show on 

the display.

In TA mode traffic program will be 

automatically searched, until the program 
is received. When traffic announcement is 
received the unit will temporarily switch to the 
tuner mode (regardless of the current mode) 
and begin broadcasting the announcement. 
After the traffic announcement is over, it will 
return to the previous mode and volume level.

PTY (Program Type)

Press LIST button to show the function list; 

tap PTY to select PTY ON or PTY OFF. When 
PTY is selected, the radio starts to search 
corresponding PTY information, and stops if 
the corresponding PTY information is detected. 
If no buttons are pressed within several 
seconds, previously selected PTY is searched. 
During 1 loop, if desired PTY is not found, the 
unit will return to previous mode.