Tesla TT27TP61S - Инструкция по эксплуатации - Страница 43

43

ENG

      It’s suggested to utilize this function every  3 

months.

       Attempt to use the air conditioner under the temperature beyond the specified range may cause the air 

conditioner protection device to start and the air conditioner may fail to operate. Therefore, try to use the air 
conditioner in the following temperature conditions.

Characteristics of heating operation (applicable to Heating pump) 
Preheating:

When the heating function is enabled, the indoor unit will take 2~5 minutes for preheating, after that the air 
conditioner will start heating and blows warm air. 

Defrosting: 

During heating, when the outdoor unit frosted, the air conditioner will enable the automatic defrosting function 
to improve the heating effect. During defrosting, the indoor and outdoor fans stop running. The air conditioner 
will resume heating automatically after defrosting finish.

With the power supply connected, restart the air conditioner after shutdown, or switch it to other mode during 
operation, and the air conditioner protection device will start. The compressor will resume operation after 3 
minutes.

1.  Long press  

  button over 3 seconds to active 

this function, and 

 will appear on the 

remote display. Do it again to deactivate this function.

2.  This function will auto start the heating mode when 

the room temperature is lower than 8

�

C (46

�

F), and it 

will return to standby if the temperature reaches 9

�

C 

(48

�

F).

3.  If the room temperature is higher than 18

�

C (64

�

F), 

the appliance will cancel this function automatically.

1.  Turn on the indoor unit, and change to COOL mode, 

then long press  

  and  

  button 

together 3 seconds to active this function,   will 
appear on the display. 
Do it again to deactivate it.

2.  This function will auto close the vertical flaps, and give 

you the comfortable gentle wind feeling.

1.  Turn on the indoor unit at first, press 

 to 

active this function,   will appear on the display. 
Do it again to deactivate it.

2.  When the HEALTH function is initiated, the Ionizer/ 

Plasma/ Bipolar Ionizer/ UVC Lights (depending on 
models) will be energized and running.

1.  In mode COOLING/ DRY, press 

button to active this function, and   will appear on 
the remote display;

2.  When turn off the air conditioner from the mode 

COOLING/ DRY, the indoor unit will continue run 
about 15 minutes to dry the indoor unit;

3.  Press it again or select other modes to cancel this 

function.

8

�C

 heating function (Optional)

Gentle Wind function 
(Optional)

Health function (Optional)

ANTI-MILDEW (Optional)

Temperature

Mode

Heating

Cooling

Dry

Room temperature

0

°

C~30

°

C

17

°

C~32

°

C

Outdoor temperature

-20

°

C~30

°

C

(Low temperature heating: 

-25

°

C~30

°

C)

T1 climate: 15

°

C~53

°

C

(Low temperature cooling: -15

°

C~53

°

C)

T3 climate: 15

°

C~55

°

C

Inverter air conditioner:

OPERATION INSTRUCTIONS