STANLEY FatMax DST 10186 100552280 - Инструкция по эксплуатации - Страница 21

G

B

21

6.4  Storage

  Warning!  

Disconnect  the  plug  from  the  socket,  vent  the 

appliance  and  tools  connected  to  it  and  empty  the 

condensate.

Switch  off  the  compressor  and  make  sure  that  it  is 

secured  in  such  a  way  that  it  cannot  be  started  up 

again by any unauthorized person.

  Warning!  

Store  the  compressor  only  in  a  dry  location  which  is 

not accessible to unauthorized persons.

Always store upright, never tilted!

7. 

DISPOSAL AND RECYCLING

  Pursuant to Directive 2012/19/EU on 

waste electrical and electronic equipment (WEEE).

The symbol carrying a crossed-out refuse container 

depicted  on  any  equipment  or  the  relative  packaging 

means that, at the end of its useful life, said product must 

be disposed of separately from other waste. 

The  user  must  therefore  take  said  equipment  to  the 

centres specialising in differentiated refuse collection of 

electric  and  electronic  equipment  or  alternatively  return 

it to the reseller when purchasing a new similar piece of 

equipment. 

Thanks  to  differentiated  refuse  collection,  discarded 

equipment can be sent to be recycled, treated and disposed 

of  in  an  environmentally-friendly  manner;  this  helps 

avoiding possible negative effects on the environment 

and on health and promotes the re-employment and/or 

recycling of the equipment’s materials.

Any unauthorised disposal of the product by the user will 

result  in  the  application  of  the  fines  provided  for  by  the 

regulations in force.

8. 

POSSIBLE FAULTS AND RELATED PERMITTED REMEDIES

Fault

Cause

Remedy

The compressor stops and restarts 

automatically after a few minutes.

Tripping of the thermal cutout due to 

overheating of the motor.

Clean the air ducts in the conveyor. 

Ventilate the work area.

After a few attempts to restart, the 

compressor stops.

Tripping of the thermal cutout due to 

overheating of the motor (removal 

of the plug with the compressor 

running, low power voltage).

Activate the 

I/O

 switch (On/Off). 

Ventilate the work area. Wait a few 

minutes. The compressor will restart 

independently.

The compressor does not stop and 

the safety valve is tripped.

Irregular compressor operation or 

pressure switch malfunction.

Remove the plug and contact the 

Service Center.

Any other type of operation must be carried out by authorized Service Centers, requesting original 

parts. Tampering with the machine may impair its safety and in any case make the warranty null 

and void.

Warranty and repair.

In  the  event  of  defective  goods  or  requirements  for  spare  parts,  kindly  contact  the  sales  point  where  you  made  your 

purchase.