COMPRAG ARD-1108-270 11110015 - Инструкция по эксплуатации - Страница 39

39

COMPRAG Schraubenkompressoren A-Serie

The compressor is overheating.

There’s insufficient ventilation in 

the facility where the compres-

sor is installed.

Increase the air circulation 

inside the facility.

The oil level is too low.

Top up oil.

The radiator is dirty.

Blow down the radiator with 

compressed air.

The safety-relief valve of the 

separator tank is activated.

The separator is dirty.

Perform maintenance by replac-

ing the separator.

The pressure is too high (over13 

bar).

Set the working pressure below 

13 bar.

7. Storage and disposal 

7.1 Storage conditions

The compressor should be kept at a temperature between  -20° and +35°С with max. 85% 

relative humidity.

7.2. Disposal of oils and process condensate. 

Used oils, greasy filters and separators should be recycled in a sealed container and dis

-

posed of at a local recycling or disposal facility. Do not allow precipitation to mix with oil. 
Process condensate contains oil. Local environmental regulations govern the degree of 
contamination of condensate discharge into sewers. Use process condensate separators to 
separate oil and further impurities from condensate. Replaceable components of a process 
condensate separator should be disposed of in the same way as greasy wiping cloths.