Moulinex XP330A10 - Инструкция по эксплуатации - Страница 4

3

2

EN

MAKING ESPRESSO 

I

MPORTANT!

I

f the espresso function is used for the first time, the appliance must be cleaned 

as described in the "FIRST USE" paragraph.

I

MPORTANT! To prevent splashes of hot water, check that the filter holder has 

been tightened until it stops before preparing the coffee. Do not remove the 

filter holder while the water is flowing, as the appliance is still under pressure.

With ground coffee

The type of coffee you choose will determine the strength and taste of your espresso: the finer your 
ground coffee, the more intense your espresso will be.

„

Fill the water tank with tepid water and refit it on the appliance, making sure that it is correctly 
in place.

„

Plug in your machine.

Ensure you have removed the red protective cap from under the water tank (1). 

–

Remove the water tank 

(A)

 and fill it. The water level should not exceed the "MAX" mark on the 

tank and should contain at least 300 ml (= equivalent to 2 large cups 

(2-3)

. Then replace the 

water tank, ensuring that the cover is closed. 

(4)

. 

–

Plug in your machine. 

(5)

. 

–

Press the On button 

(C)(6)

. On the control panel 

(D)

, the "On" indicator light switches on  

(D2) (7)

. 

–

The selection button 

(D.1)

 must be set 

to the espresso position – (button not depressed) 

 (D.1.1) (8)

.

–

Place a filter without coffee 

(F1)

 into the filter holder

 (F) (9)

. Slot the filter holder into place 

(E)

 and turn it to the right until it stops 

(10)

. Place a receptacle under the filter holder 

(11)

. 

–

When the espresso preheating indicator light 

(D2.1)

 stops flashing and stays on turn 

the thumb 

wheel (D.3)

 to the left, to espresso preparation 

(D.3.2) (12-13)

 - The flow will start after 

approximately ten seconds. 

–

Let approximately 300 ml of water trickle out (change the receptacle if necessary) 

(14)

, then 

turn 

the thumb wheel

 to position O 

(D.3.1)

 to stop preparation 

(15)

. 

–

IMPORTANT

 / After 25 minutes of disuse, your appliance will switch off automatically as a 

safeguard. 

2. 

RINSING THE STEAM SYSTEM 

Remove the water tank and fill it. The water level should not exceed the "MAX" mark on the tank and 
should contain at least 300 ml (= equivalent to 2 large cups). Then replace the water tank, ensuring 
that the cover is closed.

The selection button 

(D.1)

 must be set 

to the steam position (button depressed)

(D.1.2)

(16)

Place the nozzle into a container filled with water 

(G.1) (17)

. 

When the steam preheating indicator light 

(D2.2)

 stops flashing and stays on 

(18)

, turn the thumb 

wheel 

(D.3)

 to the right, to the steam function 

(D.3.3) (19)

. 

Let the water heat for 20 seconds 

(20)

 then turn the thumb wheel to position O 

(D.3.1)

 to stop the 

steam 

(21)

. Return the selection button 

(D.1)

 to the espresso position 

(D.1.1) (26)

. 

HELPFUL TIPS

Use of freshly roasted coffee is recommended. Contact your coffee roaster for advice. The freshness 
of the coffee only lasts several weeks after roasting. Good packaging can improve and prolong the 
flavour of the coffee. If you are unsure of the quality of the packaging, choose a recently roasted 
coffee.
Coffee must always be ground just before it is prepared.

What coffee should you choose?

„

For an aromatic coffee

Choose pure Arabica coffees or those composed mostly of Arabica coffee.
Artisan roasted coffees are preferred as they lend a better complexity and delicateness to the flavour. 
For a variety of flavours, try pure origin coffees.

„

For an intense coffee

Choose coffees blended with Robusta – not specifically 100% Arabica – or Italian-roasted coffees or 
specific Italian-flavoured coffees.

„

Keep the ground coffee in the fridge as this will lock in the flavour for longer.

„

Do not fill your filter holder to the brim; use the measuring spoon (1 spoon for a 50 ml cup, 2 
spoons for 2 x 50 ml cups). Clean off any excess coffee from around the filter holder.

„

If you have not used the appliance for more than 5 days, empty and rinse the water tank.

„

Always make sure the appliance is switched off before removing the tank to fill it or empty it.

„

Always ensure the appliance is positioned on a flat and stable surface.

FIRST USE  

OR IF THE MACHINE HAS NOT BEEN USED FOR A LONG PERIOD 

I

MPORTANT! do not place heating elements on the appliance.

I

MPORTANT! Remove the red protective cap from under the water tank.

I

MPORTANT! the safety instructions are part of the appliance.

P

lease read them carefully before using your new appliance.

RINSING THE SYSTEMS BEFORE FIRST USE

1.  RINSING THE ESPRESSO SYSTEM

To ensure your first cup of coffee tastes great, we strongly recommend that you rinse the espresso 
machine with hot water, as instructed below: