Ardesto YCM-E1600 - Инструкция по эксплуатации - Страница 37

37

steam. Press the steam switch to the “0” position to stop the unit 

immediately; make the descalers deposit in the unit at least 15 

minutes.

7.  

Restart the unit and repeat the steps of 4-6 at least 3 times.

8.  

Then Press the ON/OFF switch to “1” position, when the green 

lamp is illuminated, press the coffee/hot water selector to the “1” 

position to brew until no descaler is lef

9.  

Then brewing coffee (no coffee powder) with tap water in the 

MAX level, repeat the steps of 4-6 for 3 times (it is not necessary 

to wait for 15 minutes in step of 6), then brewing until no water is 

left in the tank.

10.  

Repeat the step of 9 at least 3 times to make sure the piping is 

cleanly.

ENVIRONMENT FRIENDLY DISPOSAL

You can help protect the environment!
Please remember to respect the local regulations: hand in the non-

working electrical equipments to an appropriate waste disposal 

center.

TROUBLE SHOOTING

Symptom

Cause

Corrections

Carafe leakage 

water or water 

leaks out from lid 

of carafe

The carafe is not 

located properly

Let centreline of carafe aligns with 

leakage opening of brew basket 

well.

The level of water in 

the tank exceeds the 

scale of MAX.

The water level in the tank should 

be within the scale of MIN and 

MAX.

Water leaks from 

the bottom of 

coffee maker.

There is much water 

in the drip tray.

Please clean the drip tray.

The coffee maker is 

malfunction.

Please contact with the authorized 

service facility for repairing.

EN