Кофеварка Ardesto YCM-E1600 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
32
MAKE ESPRESSO COFFEE
1.
Remove the funnel by turning it in clockwise. Add ground coffee
to steel mesh with measuring spoon, a spoon ground coffee power
can make about a cup of top-grade coffee, then press the ground
coffee powder tightly with the tamper.
2.
Set steel mesh into metal funnel, pull the press bar backward, make
sure the tube on the funnel aligns with groove in the appliance,
then insert the funnel into the appliance from the “Insert” position
and release the press bar, and you can fix them into coffee maker
firmly through turn it anticlockwise until it is at the “lock” position.
3.
Pour out the hot water in the cup. Then place the hot cup (yourself
cup) on removable shelf.
4.
At the time, the green lamp is illuminated, if the green lamp
is extinguished, wait for a moment, once the green lamp is
illuminated, and you should press the coffee/hot water selector on
the “1” position, waiting for a moment, there will be coffee flowing
out.
NOTE:
During operation, if the green indicator is extinguished, you
must close the pump and stop to make espresso coffee. After a
few seconds, if the green lamp is illuminated again, you can make
espresso coffee continued by pressing coffee/hot water selector to “1”
position, the green lamp is cycle ON and OFF to maintain the water
temperature is hot enough.
5.
You should press coffee/hot water selector to “0” position manually
when desired coffee is obtained or the colour of coffee changes
weak obviously, the red and green indicator go out and the coffee
maker stops working, your coffee is ready now.
WARNING:
Do not leave the coffee maker unattended during making
the coffee, as you need operate manually sometimes!
6.
After finishing making the coffee, you can take the metal funnel
out through turn anticlockwise, and then pour the coffee residue
out with the steel mesh pressed by press bar.
7.
Let them cool down completely, then rinse under running water.
EN
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
