Ardesto YCM-E1600 - Инструкция по эксплуатации - Страница 35

35

PRODUCING STEAM TO HEAT LIQUIDS

The steam wand (without the frothing device) can be used to make 

hot beverages like drinking chocolate, water or tea. Method:

1.  

Open the tank cover and fill tank with desired water. The water 

level should not exceed the “MAX” mark in the tank.

2.  

Replace the tank, then connecting the appliance to power supply 

source.

3.  

Press the ON/OFF switch to the “1” position, the red lamp is 

illuminated.

4.  

Turn the steam control knob to “OFF” or “0” position,  make the 

coffee/hot water selector on the “1”  position, the pump will 

pump water, when there is water flowing out, close the pump 

(coffee/hot water selector to the “0” position)  immediately, 

pressing the steam selector to the “1” position and waiting for a 

moment, the appliance begins to be heated until the green lamp 

is illuminated, it shows the heating is finish.

5.  

Remove the frothing device from the steam wand.

6.  

Dip the steam wand into the liquid to be heated. Turn the steam 

control knob in anti-clockwise slowly to start making steam.

7.  

When the required temperature is reached, you can turn the 

steam control knob to “OFF” or “0” position.

8.  

Press the ON/OFF switch to the “0” position to cut the power 

source off.

CLEAN AND MAINTENANCE

1.  

Cut off power source and let the coffee maker cool down 

completely before cleaning.

2.  

Clean housing of coffee maker with moisture-proof sponge often 

and clean water tank, drip tray and removable shelf regularly then 

dry them.

EN