Ardesto YCM-E1600 - Инструкция по эксплуатации - Страница 30

30

EQUIPMENT

1. Complete coffee maker - 1 pc.
2. Instruction manual - 1 pc.
3. Warranty card (included in the manual) - 1 pc.
4. Packaging (plastic bag + box) - 1 pc.

BEFORE THE FIRST USE

To ensure the first cup of coffee tastes excellent, you should rinse 

the coffee maker with warm water as follows:

1.  

Pour water into water tank, the water level should not exceed the 

“MAX” mark in the tank.

NOTE: 

The appliance is supplied with a detachable tank for easy 

cleaning, you can fill the tank with water firstly, and then put the 

tank into the appliance.

2.  

Set steel mesh into metal funnel (no coffee powder in steel mesh).

3.  

Place a jug on removable shelf. Make sure the steam control knob 

is on the “OFF” or “0” position.

NOTE: 

The appliance is not equipped with jug, please use yourself 

jug or coffee cup.

4.  

Connect to power source, turn the ON/OFF switch to the “1” 

position. The red lamp will be illuminated.

5.  

Pressing the steam switch to the “0” position and coffer/hot water 

selector to the “1” position the pump will pump water, when there 

is water flowing out and pressing the coffee/hot water selector to 

the “0” position and waiting for a moment, the appliance begins 

to be pre-heated until the green lamp is illuminated, it shows the 

pre-heating is finish. Pressing coffer/hot water selector to the “1” 

position again, and water will flow out.

6.  

After water not dropping out any more, you can pour the water 

in each container out then clean them thoroughly, now you can 

start brewing.

EN