Ardesto YCM-E1600 - Инструкция по эксплуатации - Страница 36

36

NOTE: 

Do not clean with alcohol or solvent cleanser. Never immerse 

the housing in water for cleaning.

3.  

Detach the metal funnel through turn it anticlockwise, get rid of 

coffee residue inside, then you can clean it with cleanser, but at 

last you must rinse with clear water.

4.  

Clean all the attachments in the water and dry thoroughly.

CLEANING MINERAL DEPOSITS

1.  

To make sure your coffee maker operating efficiently, internal 

piping is cleanly and the peak flavor of coffee, you should clean 

away the mineral deposits left every 2-3 months.

2.  

Fill the tank with water and descaler to the MAX level (the scale 

of water and descaler is 4:1; the detail refers to the instruction of 

descaler. Please use “household descaler”, you can use the citric 

acid (obtainable from chemist’s or drug stores) instead of the 

descaler (the one hundred parts of water and three parts of citric 

acid).

3.  

According to the program of pre-heating, put the metal funnel 

(no coffee powder in it) and carafe (jug) in place. Brewing water 

per “PRE-HEATING”.

4.  

Press the ON/OFF switch to “1” position, the red lamp will be 

illuminated,  press the steam switch to the “0” position and the 

coffee/hot water selector to the “1” position, when there is water 

flowing out and close the pump (the coffee/hot water selector 

to the “0” position), and waiting for a moment, the coffee maker 

begins to be heated.

5.  

When the green lamp is illuminated, it shows the heating is finish. 

Pressing the coffee/hot water selector to the “1” position and 

make make two cups coffee (about 2Oz). Then close the pump 

(the coffee/hot water selector to the “0” position) and wait for 5s.

6.  

Press the steam switch to the “1” position, waiting for until the 

green indicator is illuminated. Make steam for 2min, then turn 

the steam control knob to “OFF” or “0” position to stop making 

EN