Ardesto YCM-E1600 - Инструкция по эксплуатации - Страница 34

34

7.  

Pour the frothed milk into the espresso prepared; now the 

cappuccino is ready. Sweeten to taste and if desired, sprinkle the 

froth with a little cocoa powder.

8.  

Press the ON/OFF switch to the “0” position to cut the power 

source off.

NOTE: 

we recommend you allow the maker to cool down at least for 

5 min before making coffee again. Otherwise burnt odor may occur 

in your Espresso coffee.

MAKE HOT WATER

1.  

With this function, you can pre-heat your coffee cup to ensure 

that the temperature of the coffee will not decrease. So as to 

improve the coffee flavor.

2.  

Clean your coffee cup. After drinking coffee, you can directly 

make hot water with this coffee maker to clean the cups. This 

makes it more simple and convenient to clean the cups.

Methods:

1.  

Press the On/Off switch to the “1” position; the Steam switch to “0” 

position, Coffee/hot water selector to “0” position. The red lamp 

will be illuminated; waiting for a moment, the green lamp will be 

illuminated.

2.  

First, turn the steam control knob from “OFF” to “0” position in 

anti-clockwise. (Turn the knob with at least 135 degree.) Then 

press coffee/hot water selector to “1” position, and hot water will 

flow out from the steam wand.

NOTE: 

At first the hot water will scatter from the steam wand. May 

let the steam wand outlet close to the coffee cup wall. Thus at this 

moment, you need to pay attention to the protection of hot water 

splash burns skin.

EN