Кофеварка BRAYER BR1103 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
7
EN
boiler. Turn the filter holder (5) counterclockwise to
the position « » (pic. 1).
•
Place the flask (14) on the grid (2).
• Insert the power plug into the mains socket.
• Set the operation mode switch (7) to the position «
brew
», the light indicator (8) will light up, the heating
element will switch on and water will start pouring
into the flask (14) under pressure.
•
After water pouring set the operation mode switch (7)
to the position «
», and the indicator (8) will go out.
•
Pour the water out of the flask (14).
•
If necessary, repeat the washing cycle of the coffee
maker 2-3 times.
• To wash the cappuccinator pipe (10), remove the
water tank lid (9) by turning it counterclockwise
and pour some water into the tank using the flask
(14). Install the lid (9) back to its place and thread it
rotating clockwise until fixed.
•
Put the filter (6) into the holder (5), do not add ground
coffee into the filter (6).
•
Set the filter holder (5) to the position «
», turn the
filter holder (5) counterclockwise to the position «
» (pic. 1).
•
Place the flask (14) under the cappuccinator pipe
(10) tip (11).
• Insert the power plug into the mains socket.
• Set the operation mode switch (7) to the position «
steam
», the light indicator (8) will light up, the heating
element will switch on and steam under pressure will
be released into the flask (14).
•
After steam release set the operation mode switch
(7) to the position «
» to switch the coffee maker
off, and the indicator (8) will go out.
•
The coffee maker is ready for usage.
MAKING ESPRESSO
Recommendations on making espresso
•
Use ground coffee for espresso coffee makers or
freshly ground coffee beans.
•
Slightly tamp the ground coffee in the filter (6) with
the back side of the measuring spoon (15).
•
The taste of ready coffee depends on the quality and
grinding degree of coffee beans. If coffee is pouring
out too long, this means the coffee powder is too fine
or it is tamped too strongly.
ATTENTION!
-
Do not remove the filter holder (5) during coffee
maker operation.
-
When making coffee do not leave the operating
coffee maker unattended, as it is necessary to
watch the flask (14) being filled with ready coffee!
