BRAYER BR1103 - Инструкция по эксплуатации - Страница 10

10 EN

5. 

Set the filter holder (5) to the position «

», the 

filter holder (5) ledges should match the grooves in 

the boiler. Turn the filter holder (5) counterclockwise 

to the position « » (pic. 1).

6. 

Place the flask (14) on the grid (2).

7.  Insert the power plug into the mains socket.

8.  Set the operation mode switch (7) to the position «

brew

», the light indicator (8) will light up, the heating 

element will switch on and water will start pouring 

into the flask (14) under pressure.

9.  In 10-15 seconds set the operation mode switch 

(7) to the position «

», and the indicator (8) will 

go out.

10. 

Place the flask (14) under the tip (11) and set the 

operation mode switch (7) to the position «

steam

», in 

5 seconds set the operation mode switch (7) to the 

position «

».

11. 

Set the flask (14) on the grid (2), wait for 10-15 

minutes and switch the water supply on by setting 
the switch (7) to the position «

brew

», wait until the 

cleaning agent release stops completely.

12.  Set the operation mode switch (7) to the position « 

» to switch the coffee maker off and to release the 

pressure. Unplug the unit, unscrew the lid (9) and 

fill the tank with clean water. Insert the power plug 

into the mains socket.

13. 

Set the flask (14) under the tip (11) and switch the 

steam supply on «

steam

», in 15 seconds switch the 

steam supply off and place the flask (14) on the 

grid (2). Switch the water supply on and wait until 

the water release stops completely. 

14.  Set the operation mode switch (7) to the position «

» to switch the coffee maker off and to release 

the pressure.

• If necessary, repeat the washing of the coffee maker 

2-3 times. 

CLEANING AND  CARE

• 

Always switch the coffee maker off and unplug it 

before cleaning.

• 

Let the coffee maker cool down completely and clean 

the outer surfaces of the unit body with a soft, slightly 

damp cloth, then wipe dry.

• 

Use soft detergents to remove dirt; do not use metal 

brushes, abrasive detergents and solvents.

•  Remove the water tank lid (9) by turning it 

counterclockwise, turn the coffee maker upside down 

and drain the remaining water from the water tank, 

screw the lid (9).

• 

If the filter (6) openings are blocked with the ground 

coffee, clean them with a small brush. 

•  Remove the grid (2) and the tray (1), pour the water 

out, wash the tray (1) and the grid (2), rinse them and 

dry. Install the tray (1) and the grid (2) back to their 

places.