Кофеварка BRAYER BR1103 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
6
EN
persons lacking experience or knowledge if they are
not under supervision of a person who is responsible
for their safety or if they are not instructed by this
person on the usage of the unit.
• From time to time check the power cord and the
power plug integrity.
•
If the power cord is damaged, it should be replaced
by the manufacturer, a maintenance service or
similar qualified personnel to avoid danger.
•
Do not repair the unit by yourself. Do not
disassemble the unit by yourself, if any malfunction
is detected, and after it was dropped, unplug the unit
and apply to the service center.
•
Transport the coffee maker in the original package.
•
Keep the unit out of reach of children and disabled
persons.
COFFEE MAKER IS INTENDED FOR HOUSEHOLD
USE ONLY, DO NOT USE THE COFFEE MAKER FOR
COMMERCIAL OR LABORATORY PURPOSES.
BEFORE USING THE COFFEE MAKER
After unit transportation or storage at low
temperature, it is necessary to keep it for at least
three hours at room temperature.
•
Unpack the coffee maker and remove all the
packaging materials.
• Keep the original package.
•
Read the safety measures and operating
recommendations.
• Check the delivery set.
•
Examine the coffee maker for damages, in case of
damage do not plug it into the mains.
•
Make sure that the specifications of power supply
voltage specified on the lower panel of the unit
correspond to the specifications of your mains.
•
Wipe the surface of the coffee maker body with a
clean, slightly damp cloth to remove dust.
• Wash all removable parts in warm water with a
neutral detergent: the flask lid (12), the coffee flask
(14), the filter holder (5), the filter (6), the grid (2) and
the tray (1), rinse them and dry.
• Install the tray (1) and the grid (2) back to their
places.
• Make sure that the power plug is not inserted into the
mains socket, and the operation mode switch (7) is
set to the position «
».
• Remove the water tank lid (9) turning it
counterclockwise and fill the water tank, using the
flask (14). Do not exceed the maximal capacity of the
water tank.
• Install the lid (9) back to its place and thread it
rotating clockwise.
•
Put the filter (6) into the holder (5), do not add ground
coffee into the filter (6).
•
Set the filter holder (5) to the position «
», the filter
holder (5) ledges should match the grooves in the
