Smeg BCC02WHMEU - Инструкция по эксплуатации - Страница 25

EN - 8

MACHINE SETTINGS

(Fig. C-G)

Through a programming menu it is possible 

to set the water hardness and the acoustic 

signals.

Activation / deactivation of acoustic 

signals.

The acoustic signals can be disabled / 
enabled by keeping the keys (17) 

 and 

(20) 

 pressed for three seconds; the key 

(17) 

 flashes three times indicating the 

memorization of the setting. 

Setting the water hardness.

To access the water hardness programming, 
press the keys (16) 

 and (20) 

simultaneously for at least 3 seconds, the 
LEDs (21) 

, (22)

, (23)

 light 

up flashing.

•  Choose the water hardness, referring to the 

following table, pressing the key (16) 

, the LED relating to the selected hardness 

lights up steadily, the others go off.

Led

Hardness

21

Light

22

Medium

23

Hard

•  To memorize the selected hardness, 

press keys (16) 

  and (20) 

simultaneously for at least 3 seconds or do 

not press any key for 15 seconds.

Use / Cleaning and maintenance

To prolong the machine operation 

and preserve the aroma and taste of 

the coffee, it is recommended to use 

the Smeg Softener Filter (optional, 

not supplied). For installation and 

operation, follow the instructions 

that accompany the accessor y. 

Once installed, set the water 

hardness level to ‘Light’ following 

the instructions in the previous 

paragraph.

CLEANING AND MAINTENANCE

(Fig. C-E-G-H-I-L)

Manual rinse

•  Make sure that the 

Primary

 program is 

selected with keys (16), (17), (18), (19) 

illuminated in white.

•  With the machine ready to dispense and 

the drip tray mounted, press the keys (20) 

 and (19) 

 simultaneously for at 

least 3 seconds: the machine will rinse the 

coffee circuit (coffee dispenser 11) and the 

water circuit (steam wand 30).

•  At the end of the washing cycle, the keys 

light up steadily.

Cleaning of the machine body

For a good preser vation of the external 

surfaces it is necessary to clean them regularly 

at the end of each use, after letting them cool. 

Clean with a soft cloth dampened with water.

 Never immerse the machine body 

(1) in water or other liquids.

 Allow the machine to cool down 

before cleaning.