Smeg BCC02WHMEU - Инструкция по эксплуатации - Страница 23

EN - 6

Dispensing a drink

•  It is possible to adjust the position of the 

dispenser (11) according to the cup used. 

For very high cups it is possible to remove 

the drip tray (14).

•  Place a cup or large cup under the 

dispenser.

•  Press the key for the desired function. For 

each selected function, preparation stops 

automatically. 

For specific functions, refer 

to the paragraph “

DESCRIPTION OF 

CONTROLS AND ALARMS

”.

•  At the end of dispensing, all the keys light 

up fixed.

Dispensing can be stopped at any 

time by pressing the dispensing 

key again

.

 Remember to reassemble the tray 

(14) at the end of any dispensing.

It is completely normal that after a 

prolonged inactivity of the machine 

(breaks longer than 20 min)  the 

first coffees are not at the right 

temperature. The tips to obtain a hot 

coffee immediately are given in the 

section “What to do if...”

Steam delivery

•  Enter the “

Secondary

” dispensing program.

•  Make sure that the tray (14) is correctly 

assembled.

•  Press the button (19) 

 which starts 

flashing. Wait for the steam to reach the 

correct supply temperature, identified by 
the fixed lighting of the button (19) 

.

•  Place a container (31) under the steam 

wand (30) with about 100 grams of milk 

for each cappuccino you want to prepare. 
Then press the button (19) 

 to start 

dispensing the steam and at the same 

Use

USE (Fig. E-F-G-H)

•  Lift the lid (4) and insert cold water into the 

tank (5) taking care not to exceed the ‘Max’ 

level indicated, then refit the lid (4).

•  Lift the lid (2) and insert coffee beans into 

the container (3).

•  Check that the drip tray (14) is correctly 

positioned.

•  Press the button (9) 

, the machine starts 

the heating phase and the keys light up 

flashing in sequence.

  At the end of the heating, a self-cleaning 

cycle of the internal circuits is carried out 

and, once the cycle is finished, the machine 

is ready to be used.

At the first use it is recommended to 

make at least one coffee to make a 

complete break-in of all the circuits.

After 20 minutes of non-use, the 

machine switches off. If it has made 

at least one coffee, it performs a 

self-cleaning cycle. Press the button 

(9) to switch on the machine.

Change of dispensing program

The machine has two dispensing menus in 

its memory: 

Primary

 and 

Secondary

. To 

switch from one program to another, press the 
key(20) 

.

In the 

Primary

 menu all the keys are illuminated 

in white, in the 

Secondary 

menu, all the keys 

are illuminated in orange. 

For the specific functions of each menu, refer 

to the paragraph “

DESCRIPTION OF 

CONTROLS AND ALARMS

”

Turning off the machine the setting 

of the 

Primar y

 or 

Secondar y

dispensing menu remains in the 

memory at the next restart.