Siemens TE717209RW - Инструкция по эксплуатации - Страница 28

24

en

Clean and refill water tank  



start

●

Rinse the water tank 

11

 and refill it with 

fresh water up to the “

max

” mark.

●

Press the 

start

 button 

8

. The descaling pro

-

gramme now runs for about 1 minute more, 

followed by the cleaning programme for 

about 7 

minutes, and rinses the appliance.

Descaling

Cleaning

Empt y drip tray  

Repl ace drip tray

●

Empty the drip tray 

23 

and reinsert it.

Replace the filter if one is being used. The 

appliance has completed descaling and 

cleaning and is ready for use again.

Important:

 Wipe down the appliance using a 

soft, damp cloth to immediately remove any 

descaler residue. Such residue can cause 

corrosion. New sponge cloths may contain 

salts. Salts can cause rust film on stainless 

steel and must therefore be washed out 

 thoroughly before use.

Thoroughly clean the suction pipe 

10d

 of 

the milk frother.

Note:

 If one of the service programmes is 

interrupted, e. g. by a power outage, pro

-

ceed as follows:

●

Rinse the water tank 

11

 and refill it with 

fresh water up to the “

max

” mark.

●

Press the 

start

 button 

8

. The cleaning 

programme now runs for about 3 minutes, 

and rinses the appliance.

Cleaning

Empt y drip tray  

Repl ace drip tray

●

Empty the drip tray 

23 

and reinsert it.

The appliance is ready for use again.

Tips on energy saving

●

The display has a dimming function that 

switches on automatically when the 

appliance is not in use. The display is 

illuminated dimly. Press any button or 

the rotary knob to brighten the display 

illumination again.

●

If the appliance is not being used, switch 

it off at the power on/off switch 

1

O / I

 on 

the front.

●

If possible, do not interrupt coffee or milk 

froth dispensing. Stopping a process 

prematurely results in higher energy 

consumption and the drip tray fills up 

more quickly.

●

Descale the appliance regularly to avoid 

a build-up of limescale. Limescale residue 

results in higher energy consumption.

Frost protection 

¡

To avoid damage caused by frost 

during transport and storage, the 

appliance must be completely 

 emptied first.

See “Menu settings – 

Transport. lock.

”