Siemens TE717209RW - Инструкция по эксплуатации - Страница 26

22

en

Add 0.5 l water and descaler 



start

●

Pour lukewarm water into the empty water 

tank 

11

 up to the “

0.5 l

” mark and then 

dissolve two Siemens descaling tablets 

in it.

●

Press the 

start

 button 

8

. The  descaling 

programme will now run for about 

20 minutes.

Descaling

Not enough descaling fluid.  

Refill fluid 



start

Info: 

If there is not enough descaling solu-

tion in the water tank 

11

, the corresponding 

prompt is displayed. Pour in descaling solu

-

tion and press the 

start

 button 

8

 again.

Clean and refill water tank 



start

●

Rinse the water tank 

11

 and refill it with 

fresh water up to the “

max

” mark.

●

Press the 

start

 button 

8

. The descaling 

programme now runs for about 1 minute 

and rinses the appliance.

Descaling

Empt y drip tray

Repl ace drip tray

●

Empty the drip tray 

23

 and reinsert it.

Replace the filter if one is being used. The 

appliance is ready for use again.

Important:

 Wipe down the appliance 

using a soft, damp cloth to immediately 

remove any descaler residue. Such residue 

can cause corrosion. New sponge cloths 

may contain salts. Salts can cause rust 

film on stainless steel and must therefore 

be washed out thoroughly before use. 

 Thoroughly clean the suction pipe 

10d

 of 

the milk frother.

Cleaning

Duration: approx. 8 minutes. 

Cleaning and service 
Descale 

Clean 



start

The 

start

 button 

8

 flashes while the different 

cleaning processes are running. The figures 

on the top right indicate the progress of the 

programme.

●

Fill the water tank 

11

 up to the “

max

” 

mark.

●

Press the 

à

 button 

3

.

Clean 



start

●

Press the 

start

 button 

8

; the display 

5

 will 

guide you through the programme.

Empt y drip tray  

Repl ace drip tray

●

Empty the drip tray 

23 

and reinsert it. 

The appliance rinses twice.

Position swivel arm

●

Swivel the coffee outlet 

9

 to the 

left

 until it 

clicks into place.

Cleaning

Open powder compartment

●

Open the powder compartment 

18

.

Insert Siemens cleaning tablet 

and close drawer

●

Drop a Siemens cleaning tablet into the 

drawer 

18

 and close it.

Press start

●

Press the 

start

 button 

8

. The clean

-

ing programme will now run for about 

7 minutes.

Cleaning