Bosch TES 51523 RW - Инструкция по эксплуатации - Страница 21

17

TES515.. | 7/2014

en

Important:

 Wipe down the appliance using 

a soft, damp cloth to immediately remove 

any descaler residue. Such residue can 

cause corrosion. New sponge cloths may 

contain salts. Salts can cause rust film 

on stainless steel and must therefore be 

washed out  thoroughly before use.

Cleaning

Duration: approx. 10 minutes.

If the message 

Clean required!

 appears 

on the display, press the 

k

off /

i

 button 

(13) for 3 seconds and then press the 

start

button (10). 

The cleaning programme will start. 

To clean the appliance before being 

prompted, press the 

k

off /

i

 button (13) for 

at least 3 seconds. Then press the 

k

off /

i

button (13) briefly twice. Turn the upper 

rotary knob (15) until 

Start cleaning

 appears 

in the display. To start the cleaning proce

-

dure, press the 

start

 button (10). The display 

will guide you through the programme.

Empt y drip tray
Insert drip tray

● Empty drip tray (8) and replace them. 

Open drawer

● Open the drawer (4).

Fill cleaner 
Press start

●

Drop a Bosch cleaning tablet in the 

drawer (4)

and close.

●

Press the 

start

 button (10).

Cleaning in progress

The cleaning pro gramme will now run for 

about 8 minutes.

Empt y drip tray
Insert drip tray

● Empty drip tray (8) and replace them.

The appliance has finished cleaning is 

ready for use again.

Calc‘n‘Clean

Duration: approx. 35 minutes.

Calc‘n‘Clean combines the separate func-

tions of descaling and cleaning. If both 

programmes are due to be run soon, the 

espresso machine automatically suggests 

this service programme.

Important:

 If there is a filter in the water 

tank (17), it needs to be removed before the 

service programme is run.

If the message 

Calc‘n‘Clean required!

appears on the display, press the 

k

off /

i

button (13) for 3 seconds and then 

press the 

start

 button (10). The service 

programme will start.

To run Calc‘n‘Clean before being prompted, 

press the 

k

off /

i

 button (13) for at least 

3 seconds. Then press the 

k

off /

i

  button 

(13) briefly twice. Turn the upper rotary 

knob (15) until 

Start Calc‘n‘Clean 

appears 

in the display. To start Calc‘n‘Clean, press 

the 

start

 button (10).

The display will guide you through the 

programme.

Empt y drip tray
Insert drip tray

● Empty drip tray (8) and replace them.

Open drawer

● Open the drawer (4).

Fill cleaner 
Press start

●

Drop a Bosch cleaning tablet in the 

drawer (4)

and close.

●

Press the 

start

 button (10).

N.B.:

 If the water filter is activated, the display 

will prompt you to remove the filter and then 

press the 

start

 button (10) again. Remove the 

filter now if you have not already done so. 

Press the 

start

 button (10).