Bosch TES 51523 RW - Инструкция по эксплуатации - Страница 14

10

Robert Bosch Hausgeräte GmbH

en

Water hardness

: The water hardness 

setting can be adjusted on this appliance. 

It is important to set the water hardness 

 correctly, so that the appliance indicates 

accurately when the descaling programme 

should be run. The factory setting for the 

water hardness is 4. 

You can check the water hardness using 

the enclosed test strip or by asking your 

local water supplier. If a water softener is 

installed in the house, please set the water 

hardness to level 3.

Dip the test strip briefly in water, gently 

shake off any drips, and check the result 

after one minute.

Level

Water hardness

German (°dH)

French (°fH)

1

2

3

4

1-7

8-14

15-21

22-30

1-13

14-25

26-38

39-54

Drink counter

: This displays how many 

drinks have been dispensed since the appli-

ance was first put into operation.

Adjusting the 

grinding unit

The rotary selector (3) adjusts the grind 

settings from coarse to fine.

A

Warning!

Adjust the grinding unit only while it is 

 running! Otherwise the appliance may 

be damaged. Do not reach into the 

grinding unit.

●

While the grinding unit is running, adjust 

the rotary selector (3) from fine (

a:

 Turn 

anticlockwise) to coarse (

b:

 Turn clock-

wise) as required.

Note: 

The new setting will not become 

apparent until after the second cup of 

coffee.

Note:

 If the message 

Adjust coarseness!

appears in the display, the grind setting 

for the coffee beans is too fine. Adjust the 

grinding unit to a coarser setting.

Tip: 

For dark roast coffee beans, choose a 

finer grind, for lighter beans a coarser grind.