Bosch TES 51523 RW - Инструкция по эксплуатации - Страница 18

14

Robert Bosch Hausgeräte GmbH

en

The machine automatically releases water 

into the container and vacuums it up again 

via the milk tube to rinse the milk system. 

The rinse procedure stops automatically 

after about 1 minute.

●

Empty the container and clean the milk 

tube (6c).

In addition to this, clean the milk system 

thoroughly at regular intervals (by hand or 

in the dishwasher).

Dismantling the milk system for cleaning:

●

Pull the milk frother (6) forward out of the 

appliance.

●

Dismantle the milk frother into its indi-

vidual parts (6a to 6d) (see 

figure C

 at 

the start of the operating instructions).

●

Clean the individual parts with a detergent 

solution and a soft brush. If necessary, 

soak in a warm detergent solution.

●

Rinse all parts with clear water and dry 

them.

●

Reassemble all the parts and replace fully 

in the appliance.

A

Risk of scalding!

Use this appliance only after the milk frother 

(6) has been fully assembled and installed.

Cleaning the brewing unit

Clean the brewing unit regularly!

To pre-clean the brewing unit automatically:

●

Select 

k

 by turning the rotary knob (15).

● Place an empty glass under outlet (6a).

●

Press the 

start

 button (10).

The appliance rinses. 

In addition to the automatic cleaning 

programme, the brewing unit (5a) should 

be removed regularly for cleaning. (See 

figure E

 at the start of the operating 

instructions.) 

●

Switch the appliance off at the power on/

off switch 

O / I 

(9). No buttons are lit.

● Open the door (5b) to the brewing unit.

●

Slide the red lock (5e) on the brewing unit 

(5a) completely to the left.

● Press the eject lever (5d) down fully. The 

brewing unit is released.

●

Grasp the brewing unit (5a) by the 

recessed grips and remove carefully.