Fulgor Milano FBC 4500 TF X - Инструкция по эксплуатации - Страница 39

7

GB

2.6  Safety and control systems

The appliance is equipped with systems 
that ensure safety and allow control during 
operation:

• general protection fuse on the power 

cable to protect against short circuits and 
overloads;

• temperature cut-off on the compressor 

in the event of overload or operating 
anomalies;

•  double temperature cut-off on the heating 

element;

•  inner liner temperature probe, controlled 

by the power board.

3. USE

This appliance is intended mainly for blast 
chilling and deep freezing food. If cooked 
and rapidly chilled, the foods retain their 
organoleptic properties for 5-7 days; if 
rapidly frozen, thawed foods retain their 

consistency and their original lavour.

3.1  Notes for the user

•  Read this manual carefully and always 

refer to it;

• if there is any noticeable fault in the 

appliance, such as the power cable is 
damaged or a failure in the control panel, 
switch off the appliance and contact the 
service centre;

• this appliance is not intended for use 

by children or persons with reduced 
physical, sensory or mental capabilities, 
or lack of experience and knowledge, 
unless supervised or instructed regarding 
use. Children must not play with the 
equipment;

• do not introduce explosives, such as 

aerosol cans with a lammable propellant, 

inside the appliance;

•  this appliance is intended for domestic 

use;

• while operating and according to the 

selected program the appliance may 
become hot. Take adequate precautions 
before working inside the appliance.

Warning!

 While operating the appliance may be-

come hot. Keep children away.

•  This appliance is intended for the use for 

which it was designed: chilling, freezing, 
thawing, leavening, slow cooking, 
warming, sanitising foods and cooling 
beverages at home. Any other use is 
considered improper and potentially 
dangerous.

3.2  Internal preparatory cleaning

Once the electrical connections and the 
positioning are complete and before turning 
on the appliance it is necessary to deep 
clean the inner liner, using a soft cloth and 
a neutral detergent.
Do not use steel wool, scrapers or abrasive, 
acidic or aggressive substances as this 
may damage the inner surfaces. Remove 
any detergent residue.

3.3  The core probe

The core probe is a device used for mea-
suring the temperature inside the food. In 
programs that require the use of the core 
probe, the process ends automatically 
when the setpoint temperature is reached. 
Correct use of the probe requires the probe 
to be inserted into the food before starting 
the program.