Fulgor Milano FBC 4500 TF X - Инструкция по эксплуатации - Страница 35

3

GB

3

1. INSTALLATIONN

1.1  General instructions

This manual contains instructions about 
installation, use and safety. Read these 
instructions carefully.
Store this manual for future reference 
and keep it with the appliance if sold.
During installation, handling and 
transport, rest the appliance base on a 

lat  surface,  avoiding  inclined  positions 

for prolonged periods.
The appliance cannot be used by children 
or persons with reduced physical, 
sensory or mental capabilities or lack of 
experience or knowledge, without the 
supervision of an adult or a tutor.
Children must not play with the appliance. 
User cleaning and maintenance must not 
be performed by unsupervised children.
The power cable and the plug must 
be accessible when the appliance is 
installed. The cable must not be bent or 
squashed as this may compromise the 
insulation.
Once the installation is complete the 
ventilation outlets must not be obstructed.
All electrical parts as well as the parts 
of the cooling circuit must be checked 
regularly by authorized technical 
personnel.
The manufacturer is not responsible 
for damage due to incorrect operation, 
improper use, or as a consequence of 

unauthorized repairs or modiications.  

1.2 Warnings

This manual is an integral part of the product 
and provides all the necessary information 
for proper installation and maintenance of 
the machine.
It is mandatory that the user and the installer 
read this manual carefully and always 
refer to it; it must be kept in a well-known 
place, accessible to all authorized operators 
(installer, user, maintainer).
The manual must be kept in a dry place.
The manufacturer declines all responsibility 
and obligations for any damage to the 
appliance, people and property, that may be 
attributable to:
•  incorrect installation and/or failure to 
comply with applicable laws;

•  modiications or improper maintenance;

•  use of non-genuine spare parts or spare 
parts not suitable for the model;
•  total or partial non-compliance with the 
instructions in this manual;
•  non-compliance with safety instructions 
and applicable laws during installation.

1.3 Introduction

The installation must be performed only 

by  authorized  and  qualiied  personnel, 

observing the warnings, instructions 
and requirements contained in this 
document.

Before installing the appliance ensure that 
the existing electrical systems comply with 
the law and correspond to the data on the 
appliance label to be installed in terms of 
voltage [V], frequency [Hz] and input power 
[W].
The manufacturer of this equipment declares 
the conformity of each appliance with the 
regulations in force.