Moulinex OW210130 - Инструкция по эксплуатации - Страница 66

66

PROBLEMS

CAUSES - SOLUTIONS

The kneading paddle is 

stuck in the pan.

• Let it soak before removing it.

After pressing on  , 

nothing happens.

• EO1 is displayed and flashes on the screen, the appliance 

beeps: the appliance is too hot. Wait 1 hour between 2 cycles.

• EOO is displayed and flashes on the screen, the appliance 

beeps: the appliance is too cold. Wait for it to reach room 

temperature.

• HHH or EEE is displayed and flashes on the screen, the 

appliance beeps: malfunction. The machine must be serviced 

by authorised personnel.

• A delayed start has been programmed.

After pressing on  , 

the motor is on but no 

kneading takes place.

• The pan has not been correctly inserted.

• Kneading paddle missing or not installed properly.

In the two cases cited above, stop the appliance manually with 

a long press on the   button. Start the recipe again from the 

beginning.

After a delayed start, 

the bread has not risen 

enough or nothing 

happens.

• You forgot to press on   after programming the delayed start 

programme.

• The yeast has come into contact with salt and/or water.

• Kneading paddle missing.

Burnt smell.

• Some of the ingredients have fallen outside the pan: unplug 

the appliance, let it cool down, then clean the inside with a 

damp sponge and without any cleaning product.

• The preparation has overflowed: the quantity of ingredients 

used is too great, notably liquid. Follow the proportions given 

in the recipe.

TECHNICAL TROUBLESHOOTING GUIDE