VERTO 1300 Вт 52G573 - Инструкция по эксплуатации - Страница 10

10

TRANSLATION OF THE ORIGINAL INSTRUCTIONS

ELECTRIC LAWN MOWER   

52G573

CAUTION, IMPORTANT: BEFORE USING THE POWER TOOL READ THIS 

MANUAL CAREFULLY AND KEEP IT FOR FUTURE REFERENCE.

DETAILED SAFETY REGULATIONS

SAFETY INSTRUCTIONS FOR LAWN MOWERS USE

Operating safety of mains powered lawn mowers in practice

1.  Instructions

a.  Read instructions carefully. Familiarize yourself with control systems 

and proper use of the equipment.

b.  Never let children and persons unfamiliar with the device 

instruction manual to operate the device. Local country regulations 

may define limits for age of operator.

c.  Never mow when other persons, especially children, or animals are 

close by.

d.  Bear in mind that the operator or user is responsible for any accident 

or emerging hazards to other persons or surrounding.

2. Preparation

a.  When mowing always wear sturdy shoes and long trousers. Do 

not use the tool barefoot or when wearing open sandals. Avoid 

damaged clothes that is too loose or with hanging strips or ribbons. 

b.  Carefully check area that you plan to work on with the device, 

remove all objects that could get into the device.

c.  Before using the tool always check that blades, bolts and blade 

unit equipment are not worn or damaged. Replace worn out 

or damaged parts in pairs or sets to maintain balance. Replace 

damaged or illegible labels.

d.  Before use check power cord and extension cord for damages 

and wear. In case the power cord gets damaged during operation, 

disconnect it from power supply. DO NOT TOUCH POWER CORD 

BEFORE DISCONNECTING FROM THE POWER SUPPLY. Do not use 

the device with damaged or broken power cord.

3. Use

a.  Mow only in daylight or good illuminated places.

b.  Avoid cutting wet grass.

c.  When standing on a sloped terrain always ensure you stand firmly 

on the ground.

d.  Walk, never run.

e.  Cut only crosswise a slope, never up or down.

f.  Be very careful when changing direction of movement on a sloped 

terrain.

g.  Do not mow overly sloped lawns.

h.  Be very careful when moving back or pulling the tool to yourself.

i.  Switch off the cutting assembly drive when the device is to be tilted 

when moving on surfaces other than grass, or when it is carried  to 

place of work and back. 

j.  Do not use the tool with damaged guard or body and without 

protective elements, such as attached guards and/or grass 

container.

k.  Make sure your feet are away from the cutting assembly and only 

then switch on the motor as described in the manual.

l.  Do not tilt the tool when starting the motor except for devices that 

specifically require to be tilted during start-up. In such case do not 

tilt more than necessary and lift only the part that is away from the 

tool operator. 

m. Do not start the device when standing before exhaust hole. 

n.  Keep your hands and feet away from rotating parts. Make sure the 

exhaust hole is not clogged or obstructed at all times. 

o.  Do not carry the device with the motor switched on.

p.  Stop the device and remove the plug from the socket. Make sure 

that all moving parts are stopped:

–

whenever you go away from the device, 

–

before cleaning or unclogging exhaust, 

–

before checking, cleaning or repairing the device, 

–

after the device is hit. Make sure the device is not damaged and 

repair it in authorized service when necessary. Only then you can 

start and operate the device again. When the tool starts to vibrate 

excessively (check immediately):

–

check for damages,

GB

–

replace or repair any damaged part, 

–

check and tighten parts that have loosened.

4.  Maintenance and storage

a.  Keep in good condition all nuts, bolts and screws to be sure the tool 

operates safely.

b.  Often check grass container against wear and damage.

c.  Be very careful when using a multi-blade tool, because turning one 

blade may cause other blades to turn as well.

d.  Be careful when adjusting the device and avoid putting your fingers 

between moving blades and fixed parts of the tool.

e.  Always leave the tool to cool down before starting it again.

f.  Stay alert at all times during operation, even when the drive is off, 

because blades may still be rotating.

g.  To keep the operation safe, replace worn out or damaged parts. Use 

only original spare parts and equipment.

5.  Guidelines for class II devices

Supply power to the tool only with a residual current device (RCD) with 

tripping current not exceeding 30 mA.

Explanation of used symbols 

10

11

IPX4

1. 

WARNING. Read the instruction manual.

2. 

Keep bystanders at safe distance

3. 

Beware of sharp blades. Blades rotate after switching the motor 

off – remove plug from the mains socket before maintenance or 

whenever the power cord is damaged.

4. 

Keep flexible power cord away from cutting part. 

5. 

Protection class IPX4

6. 

Protection class 2.

7. 

Use personal protection measures (protective goggles, earmuff 

protectors)

8. 

Use protective clothes.

9. 

Keep the tool away from children.

10. 

Protect the tool from moisture.

11. 

Recycling

CONSTRUCTION AND USE

The lawn mower is a device with insulation class II. It is driven by single-

phase AC commutator motor. The lawn mower is designed for mowing 

lawn in home garden. Use accessories only designed for this type of 

device and follow all instructions contained in the manual. Mow grass 

in even strips. Mower can be pushed or pulled. Mower is intended for 

amateur use only.

Use the power tool according to the manufacturer’s instructions 

only.
DESCRIPTION OF DRAWING PAGES

Below enumeration refers to the device elements depicted on the 

drawing pages of this manual.

1. 

Motor casing

2. 

Transport handle

3. 

Outlet lid