Ryobi RLM4614 5133002550 - Инструкция по эксплуатации - Страница 4

English

2

frequently. 

■

Replace worn or damaged blades and bolts in sets to 
preserve balance.

■

Check all nuts, bolts, and screws at frequent intervals 
for proper tightness to be sure that the product is in safe 
working condition.

■

Check the grass catcher frequently for wear, holes,  
or deterioration. This can cause objects to be thrown 
towards the operator.

■

Replace worn or damaged parts before operating the 
product.

■

Never operate the product if the presence control lever, 
when released, does not stop the engine.

■

The product shall not be operated without either entire 
grass catcher or self-closing discharge opening guard 
in place.

■

Do not use the product when there is a risk of lightning.

■

Do not force the product. It will do the job better and 
safer at the speed for which it was designed.

■

Do not overload your mower. Mowing long thick grass 
may cause the motor speed to drop, or the power to cut 
out. When mowing in long thick grass a first cut with the 
cutting height set higher will help reduce the load. See 
adjusting the blade height.

■

Stop the blade when crossing gravel surfaces.

■

Do not pull the mower backward unless absolutely 
necessary. If you must back the machine away from a 
wall or obstruction, first look down and behind to avoid 
tripping or pulling the machine over your feet.

■

Stop the blade(s) if the product has to be tilted for 
transportation when crossing surfaces other than 
grass, and when transporting the product to and from 
the area to be mowed.

■

Never operate the product with defective guards 
or shields, or without safety devices, for example 
deflectors and/or grass collector, in place.

■

Start the engine carefully according to instructions and 
keep hands and feet away from cutting area. Keep 
clear of the discharge opening at all times.

■

Never pick up or carry a lawn mower while the engine 
is running.

■

Avoid holes, ruts, bumps, rocks, property stakes, or 
other hidden objects. Uneven terrain could cause a slip 
and fall accident.

■

When not in use, the product should be stored in a 
well-ventilated, dry, locked up place-out of the reach of 
children.

■

Follow manufacturer’s instructions for proper operation 
and installation of accessories. Only use accessories 
approved by the manufacturer.

■

Do not operate the engine in a confined space where 
dangerous carbon monoxide fumes can collect. 

■

Do not change the engine governor settings or over-
speed the engine.

■

Do not tilt the product when starting the engine or while 
the engine is running. This exposes the blade and 
increases the probability of objects being thrown.

■

Do not start the engine when standing in front of the 
discharge chute.

■

Stop the engine, disconnect the spark plug wire, and 
wait until the blade comes to a complete stop and allow 
it cool before for the below case:

●

whenever you leave the product unattended 

●

before cleaning a blockage or unclogging chute

●

before checking, cleaning or working on the product 

●

after striking a foreign object; inspect the appliance 
for damage and make repairs as necessary before 
restarting and operating the machine.

●

before clearing the grass catcher 

■

If the product starts to vibrate abnormally (check 
immediately) 

●

inspect for damage

●

replace or repair any damaged parts

●

check for and tighten any loose parts 

■

If the product strikes a foreign object, follow these 
steps:

●

Stop the product and disconnect the spark plug 
wire. 

●

Thoroughly inspect the product and grass catcher 
for any damage. 

●

Repair any damage before restarting and continuing 
to operate the product.

■

Allow engine to cool before storing in any enclosure.

■

To reduce the risk of fire, keep the engine, silencer, and 
petrol storage area free of grass, leaves, and excessive 
grease.

■

If the fuel tank has to be drained, this should be done 
outdoors.

■

Disconnect the spark plug before making any 
adjustment, transporting, or storing the product. Such 
preventive safety measures reduce the risk of starting 
the product accidentally.

■

The product is extremely noisy and permanent hearing 
loss or damage may result if precautions to limit your 
exposure, reduce noise, and wear hearing protection 
are not strictly adhered to.

SERVICE

■

Service on the product must be performed by qualified 
repair personnel only. Service or maintenance 
performed by unqualified personnel could result in a 
risk of injury to the user, or damage to the product.

■

When servicing, use only original manufacturer’s 
replacement parts. Use of unauthorised parts may 
create a risk of serious injury to the user, or damage 
to the product.

NOTE:

 Only perform the tasks listed in this manual. For 

other service or repair, it should be done by a quali

fi

 ed 

person.