Bosch 0.601.5A4.301 - Инструкция по эксплуатации - Страница 12

12

 | English

1 609 92A 4LF | (26.10.2018)

Bosch Power Tools

power tool while you are tired or under the influence
of drugs, alcohol or medication. 

A moment of inatten-

tion while operating power tools may result in serious per-
sonal injury.

u

Use personal protective equipment. Always wear eye
protection. 

 Protective equipment such as a dust mask,

non-skid safety shoes, hard hat or hearing protection
used for appropriate conditions will reduce personal in-
juries.

u

Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool. 

Carrying power tools with your finger on the switch or en-
ergising power tools that have the switch on invites acci-
dents.

u

Remove any adjusting key or wrench before turning
the power tool on. 

 A wrench or a key left attached to a

rotating part of the power tool may result in personal in-
jury.

u

Do not overreach. Keep proper footing and balance at
all times. 

 This enables better control of the power tool in

unexpected situations.

u

Dress properly. Do not wear loose clothing or jew-
ellery. Keep your hair and clothing away from moving
parts. 

Loose clothes, jewellery or long hair can be caught

in moving parts.

u

If devices are provided for the connection of dust ex-
traction and collection facilities, ensure these are con-
nected and properly used. 

 Use of dust collection can re-

duce dust-related hazards.

u

Do not let familiarity gained from frequent use of tools
allow you to become complacent and ignore tool
safety principles.

 A careless action can cause severe in-

jury within a fraction of a second.

Power tool use and care

u

Do not force the power tool. Use the correct power
tool for your application. 

 The correct power tool will do

the job better and safer at the rate for which it was de-
signed.

u

Do not use the power tool if the switch does not turn it
on and off. 

 Any power tool that cannot be controlled

with the switch is dangerous and must be repaired.

u

Disconnect the plug from the power source and/or re-
move the battery pack, if detachable, from the power
tool before making any adjustments, changing ac-
cessories, or storing power tools. 

Such preventive

safety measures reduce the risk of starting the power tool
accidentally.

u

Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. 

 Power

tools are dangerous in the hands of untrained users.

u

Maintain power tools and accessories. Check for mis-
alignment or binding of moving parts, breakage of
parts and any other condition that may affect the
power tool’s operation. If damaged, have the power

tool repaired before use.

 Many accidents are caused by

poorly maintained power tools.

u

Keep cutting tools sharp and clean. 

 Properly main-

tained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.

u

Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into ac-
count the working conditions and the work to be per-
formed. 

 Use of the power tool for operations different

from those intended could result in a hazardous situation.

u

Keep handles and grasping surfaces dry, clean and
free from oil and grease. 

 Slippery handles and grasping

surfaces do not allow for safe handling and control of the
tool in unexpected situations.

Service

u

Have your power tool serviced by a qualified repair
person using only identical replacement parts. 

This

will ensure that the safety of the power tool is maintained.

Safety instructions for planers

u

Wait for the cutter to stop before setting the tool
down. 

 An exposed rotating cutter may engage the sur-

face leading to possible loss of control and serious injury.

u

Hold the power tool by insulated gripping surfaces,
because the cutter may contact its own cord. 

Cutting a

"live" wire may make exposed metal parts of the power
tool "live" and could give the operator an electric shock.

u

Use clamps or another practical way to secure and
support the workpiece to a stable platform. 

Holding

the workpiece by your hand or against the body leaves it
unstable and may lead to loss of control.

u

Only bring the power tool into contact with the work-
piece when switched on.

 Otherwise there is danger of

kickback if the cutting tool jams in the workpiece.

u

Do not allow the chip ejector to come into contact with
your hands. 

You may be injured by rotating parts.

u

Never plane over metal objects, nails or screws. 

Cut-

ters and cutter shafts could become damaged and cause
increased vibration.

u

Use suitable detectors to determine if utility lines are
hidden in the work area or call the local utility com-
pany for assistance.

 Contact with electric lines can lead

to fire and electric shock. Damaging a gas line can lead to
explosion. Penetrating a water line causes property dam-
age or may cause an electric shock.

u

While working, always hold the planer in such a way
that the planer base plate lies flat against the work-
piece. 

Otherwise the planer could slip and cause injury.

Products sold in GB only:

Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.