VERTO VES 18В Li-Ion 52G585-0 - Инструкция по эксплуатации - Страница 12

12

GWARANCJA I SERWIS

Warunki gwarancji oraz opis postepowania w przypadku reklamacji 
zawarte są w załączonej Karcie Gwarancyjnej.

Serwis Centralny
GTX Service 

tel. +48 22 573 03 85

Ul. Pograniczna 2/4 

fax. +48 22 573 03 83 

02-285 Warszawa 

e-mail service@gtxservice.pl

 
Sieć Punktów Serwisowych do napraw gwarancyjnych i pogwarancyjnych 
dostępna na platformie internetowej  

gtxservice.pl

Grupa Topex zapewnia dostępność części zamiennych oraz materiałów 
eksploatacyjnych dla urządzeń i elektronarzędzi.

Pełna oferta części i usług na 

gtxservice.pl

. Zeskanuj kod QR i wejdź:

TRANSLATION OF THE ORIGINAL INSTRUCTIONS

CORDLESS CHAIN SAW 

52G585

CAUTION: BEFORE USING THE POWER TOOL READ THIS MANUAL 
CAREFULLY AND KEEP IT FOR FUTURE REFERENCE.

DETAILED SAFETY REGULATIONS

SAFETY CONDITIONS SPECIFIC FOR CORDLESS CHAIN SAWS

WARNING: Observe safety regulations when using the chain saw. 
For your own and other persons safety read this manual before 
starting to work with the saw. Please keep this manual for future 
reference.

• Hold the saw only by the insulated handles in case the chain gets 

in contact with undetected electrical wire. 

Contact of chain with 

live electrical wire may cause voltage to appear on exposed parts of 
the tool and electric shock of the operator.

• When working with the chain saw never bring any part of your 

body near the chain. Before starting the chain saw make sure the 
chain does not touch any object.

 A moment of inattention when the 

chain saw is working may cause catching of clothes or body part with 
the chain.

• Always hold the chain saw with your right hand on the rear handle 

and your left hand on the front handle. 

Holding the chain saw with 

inversed hand positions causes risk of body injury and is not allowed. 

• Caution: 

In case of chain saws with guide bar located on the left side, 

phrases "right hand" and "left hand" should be inversed.

• Use protective glasses and hearing protection. It is recommended 

to use additional safety equipment for head, hands, legs and feet. 

Proper safety clothes limit risk of body injury caused by projected 
pieces of material or accidental contact with the chain of the saw.

• Do not use the chain saw while standing on a tree. 

Use of the chain 

saw while being on a tree may cause body injury.

• Operator must stand firmly on the ground and can use the chain 

saw only when standing on firm, safe and even surface. 

Standing 

on slippery or unstable surface, e.g. on a ladder, may cause loss of 
balance or control over the saw. 

• When cutting branches under bending or torsion stress 

remember about possibility of a sudden kick. 

When releasing the 

energy of fibres in wood under stress, the branch may hit the operator 
or cause loss of control over the chain saw. 

• Be very careful when cutting bushes and saplings. 

Soft and flexible 

parts can get caught by the chain saw and hit the operator, causing 
loss of balance. 

• Carry the chain saw when it is switched off, holding it by the 

front handle and away from your body. Always put the guide bar 
cover on for chain saw carrying or storage. 

Appropriate handling 

the chain saw allows to limit the possibility of accidental contact with 
moving chain.

• Follow instructions for lubrication, tensioning and replacement 

of accessories. 

Improperly tensioned or lubricated chain may break 

or improve risk of kickback. 

• Keep chain saw handles dry, clean and free from oil or grease. 

Greasy or oily handles can cause loss of control over the saw.

• The saw is designed to cut only wood. 

Use the saw only in 

accordance with its purpose. Examples of misuse include cutting 
plastic or construction materials other than wood. Use of the chain 
saw for purposes other than it is designed for may cause dangerous 
situations.

• The saw is designed for maintenance cutting in home garden. The 

chain saw is designed for cutting off or cutting through branches. 

It is not designed for felling trees. 

Causes of kickback and ways to prevent it:

Kickback may occur when the chain gets caught and pinched in a cut. 
Safety is improved thanks to anti kickback guard located on the guide 
bar tip. It prevents from touching processed material with the guide bar 
tip and protects from kickback. Pinching of the chain on the top side of 
the guide bar may cause fast kickback towards the operator. It may cause 
loss of control of the saw and serious body injury. Never rely solely on 
the protective devices of the saw. The user is responsible for taking few 
actions to avoid accidents and body injuries during work. Kickback is an 

GB