Ryobi RY36CSX35A-0 - Инструкция по эксплуатации - Страница 6

4

| English

the saw which could result in serious personal injury. Do 

not rely exclusively upon the safety devices built into your 

saw. As a chainsaw user, you should take several steps to 

keep your cutting jobs free from accident or injury.
Kickback is the result of tool misuse and/or incorrect 

operating procedures or conditions and can be avoided by 

taking proper precautions as given below:

■

Maintain a firm grip, with thumbs and fingers 

encircling the chainsaw handles, with both hands 

on the saw and position your body and arm to allow 

you to resist kickback forces.

 Kickback forces can 

be controlled by the operator, if proper precautions are 

taken. Do not let go of the chainsaw.

■

Do not overreach and do not cut above shoulder 

height. 

This helps prevent unintended tip contact and 

enables better control of the chainsaw in unexpected 

situations.

■

Use only replacement bars and chains that are 

specified by the manufacturer.

 Incorrect replacement 

bars and chains may cause chain breakage and/or 

kickback.

■

Follow the manufacturer’s sharpening and 

maintenance instructions for the saw chain.

Decreasing the depth gauge height can lead to 

increased kickback.

ADDITIONAL CHAINSAW SAFETY WARNINGS

■

It is recommended to cut logs on a saw-horse or cradle 

when operating the product for the first time.

■

Ensure that all guards, handles, and spiked bumper are 

properly fitted and are in good condition.

■

Persons using this chainsaw should be in good health. 

The chainsaw is a heavy unit so the operator requires 

to be physically fit. The operator should be alert, have 

good vision, mobility, balance and manual dexterity. If 

there is any doubt, do not operate the chainsaw.

■

Do not start using the product until you have a clear 

work area, secure footing, and a planned retreat path 

away from the falling tree.

■

Beware of the emission of lubricant mist and saw dust. 

Wear a mask or respirator if required.

■

Do not cut vines and/or small undergrowth (less than 

75 mm in diameter).

■

Always hold the chainsaw with both hands when 

operating the saw. Use a firm grip with thumbs and 

fingers encircling the chainsaw handles. Right hand 

must be on the rear handle and left hand on the front 

handle.

■

Before starting the product, make sure that the saw 

chain is not contacting any object.

■

Do not modify your tool in any way or use it to power 

any attachments or devices that are not recommended 

by the manufacturer for your saw.

■

There should be a first-aid kit containing large 

wound dressings and a means to summon attention 

(e.g., whistle) close to the operator. A larger more 

comprehensive kit should be reasonably nearby.

■

Wear a helmet at all times when operating the product. 

A helmet, equipped with mesh visor, can help reduce 

the risk of injury to the face and the head if kickback 

occurs.

■

An incorrectly tensioned chain can jump off the guide 

bar and could result in serious injury or fatality. The 

length of chain depends on the temperature of the 

chain and chain wear. Check the tension frequently.

■

You should get used to your new chainsaw by making 

simple cuts on securely supported wood. Do this 

whenever you have not operated the saw for some 

time.

■

To reduce the risk of injury associated with contacting 

moving parts, always stop the motor, apply chain brake, 

remove the battery pack, and make sure that all moving 

parts have come to a stop before:

–

cleaning or clearing a blockage

–

leaving the product unattended

–

installing or removing attachments

–

checking, maintenance or working on the product

■

The size of the work area depends on the job being 

performed as well as the size of the tree or work piece 

involved. For example, felling a tree requires a larger 

work area than making other cuts, i.e., bucking cuts, 

etc. The operator needs to be aware and in control of 

everything happening in this work area.

■

Do not cut with your body in line with the guide bar 

and chain. If you do experience kickback this will help 

prevent the chain from coming into contact with your 

head or body.

■

Do not use a back and forward sawing motion, let the 

chain do the work, keep the chain sharp and don’t try to 

push the chain through the cut.

■

Do not put pressure on the saw at the end of the cut. 

Be ready to take on the weight of the saw as it cuts free 

from the wood. Failure to do so could result in possible 

serious personal injury.

■

Do not stop the saw in the middle of a cutting operation. 

Keep the saw running until it is removed from the cut. 

Personal protective equipment

Good quality personal protective equipment as used 

by professionals will help to reduce the risk of injury to 

the operator. The following items should be used when 

operating your chainsaw:

Safety helmet

■

should comply with EN 397 and be CE marked

Hearing protection

■

should comply with EN 352-1 and be CE marked

Eye and face protection

■

should be CE marked and comply with EN 166 (for 

safety glasses) or EN 1731 (for mesh visors)

Gloves

■

should comply with EN381-7 and be CE marked

Leg protection (chaps)

■

should comply with EN381-5, be CE marked and 

provide all-round protection.

Chainsaw safety boots

■

should comply with EN ISO 20345:2004 and be marked