Ryobi RY36CSX35A-0 - Инструкция по эксплуатации - Страница 11

9

English |

EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR

■

Take frequent work breaks. Limit the amount of 

exposure per day.

■

Protective gloves available from professional chainsaw 

retailers are designed specifically for chainsaw use , 

which give protection, good grip, and reduce the effect 

of handle vibration.

If you experience any of the symptoms of this condition, 

immediately discontinue use and see your physician.

 WARNING

Injuries may be caused, or aggravated, by prolonged 

use of a tool. When using any tool for prolonged periods, 

ensure you take regular breaks.

KNOW YOUR PRODUCT

See page 276.

1.  Saw chain

2.  Guide bar

3.  Front hand guard/Chain brake

4.  Front handle

5.  Rear handle

6.  Chain lubricant cap

7.  Guide bar cover

8.  Chain tensioner knob

9.  Chain tensioner adjustment ring

10. Sprocket cover

11. Switch trigger

12. Trigger release

13. Spiked bumper

SAFETY DEVICES

Low kick-back saw chain

A low-kick-back saw chain helps to reduce the possibility 

of a kickback event.
The rakers (depth gauges) ahead of each cutter can 

minimize the force of a kick-back reaction by preventing the 

cutters from digging in too deeply. Only use replacement 

guide bar and chain combinations recommended by the 

manufacturer.
As saw chains are sharpened, they lose some of the low 

kickback qualities and extra caution is required. For your 

safety, replace saw chains when cutting performance 

decreases.

Spiked bumper

The integral bumper spike may be used as a pivot when 

making a cut. It helps to keep the body of the chainsaw 

steady while cutting. When cutting, push the product 

forward until the spikes dig into the edge of the wood, then 

by moving the rear handle up or down in the direction of the 

cutting line it can help ease the physical strain of cutting

Guide bars

Generally, guide bars with small radius tips have somewhat 

lower potential for kick-back. Use a guide bar and matching 

chain that is just long enough for the job. Longer bars 

increase the risk of loss of control during sawing. Regularly 

check the chain tension. When cutting smaller branches 

(less than the full length of the guide bar), the chain is more 

likely to be thrown off if the tension is not correct.

Chain brake

Chain brakes are designed to quickly stop the chain 

rotating. When the chain brake lever/hand guard is pushed 

towards the bar, the chain should stop immediately. A 

chain brake does not prevent kick-back. It only lowers the 

risk of injury should the chain bar contact the operator’s 

body during a kick-back event. The chain brake should be 

tested before each use for correct operation in both the run 

and brake positions.

 WARNING

If the chain brake does not stop the chain immediately, 

or if the chain brake will not stay in the run position 

without assistance, take the product to an authorised 

service centre for repair prior to use.

Chain catcher

A chain catcher prevents the saw chain from being thrown 

back towards to the operator if the saw chain comes loose 

or breaks.

SYMBOLS ON THE PRODUCT

Safety alert

Read and understand all instructions 

before operating the product. Follow all 

warnings and safety instructions.

Wear eye, ear, and head protection.

Wear non-slip safety footwear when 

using the product.

Wear non-slip, heavy-duty gloves.

Beware of chain saw kickback and 

avoid contact with bar tip.

Do not expose the product to rain or 

damp conditions.

Hold and operate the saw properly 

with both hands.

Do not operate the saw using only 

one hand.

Set the chain brake to the RUN 

position.
Set the chain brake to the BRAKE 

position.