Makita LXT DUC303Z - Инструкция по эксплуатации - Страница 9

9 ENGLISH

Intended use

This chain saw is intended for sawing wood.

Noise

The typical A-weighted noise level determined accord

-

ing to EN60745:

Model DUC303

Sound pressure level (L

pA

) : 87.7 dB(A)

Sound power level (L

WA

) : 100.4 dB (A)

Uncertainty (K) : 2 dB(A)

Model DUC353

Sound pressure level (L

pA

) : 87.7 dB(A)

Sound power level (L

WA

) : 100.4 dB (A)

Uncertainty (K) : 2 dB(A)

WARNING:

Wear ear protection.

Vibration

The vibration total value (tri-axial vector sum) deter-

mined according to EN60745:

Model DUC303

Work mode: cutting wood

Vibration emission (a

h,W

) : 5.3 m/s

2

Uncertainty (K) : 1.5 m/s

2

Model DUC353

Work mode: cutting wood

Vibration emission (a

h,W

) : 5.3 m/s

2

Uncertainty (K) : 1.5 m/s

2

NOTE:

 The declared vibration emission value has 

been measured in accordance with the standard test 

method and may be used for comparing one tool with 

another.

NOTE:

 The declared vibration emission value 

may also be used in a preliminary assessment of 

exposure.

WARNING:

 The vibration emission during actual 

use of the power tool can differ from the declared 

emission value depending on the ways in which the 

tool is used.

WARNING:

 Be sure to identify safety measures 

to protect the operator that are based on an estima-

tion of exposure in the actual conditions of use (taking 

account of all parts of the operating cycle such as 

the times when the tool is switched off and when it is 

running idle in addition to the trigger time).

EC Declaration of Conformity

For European countries only

The EC declaration of conformity is included as Annex A 

to this instruction manual.

SAFETY WARNINGS

General power tool safety warnings

WARNING:

Read all safety warnings, instruc-

tions, illustrations and specifications provided with this 

power tool.

 Failure to follow all instructions listed below 

may result in electric shock, fire and/or serious injury.

Save all warnings and instruc-

tions for future reference.

The term "power tool" in the warnings refers to your 

mains-operated (corded) power tool or battery-operated 

(cordless) power tool.

Cordless Chain saw safety warnings

1. 

Keep all parts of the body away from the saw 

chain when the chain saw is operating. Before 

you start the chain saw, make sure the saw chain 

is not contacting anything.

 A moment of inatten

-

tion while operating chain saws may cause entan-

glement of your clothing or body with the saw chain.

2. 

Always hold the chain saw with your right 

hand on the rear handle and your left hand on 

the front handle.

 Holding the chain saw with a 

reversed hand configuration increases the risk of 

personal injury and should never be done.

3. 

Hold the power tool by insulated gripping sur-

faces only, because the saw chain may contact 

hidden wiring.

 Saw chains contacting a "live" wire 

may make exposed metal parts of the power tool 

"live" and could give the operator an electric shock.

4. 

Wear safety glasses and hearing protection.

Further protective equipment for head, hands, 

legs and feet is recommended. Adequate protec

-

tive clothing will reduce personal injury by flying 

debris or accidental contact with the saw chain.

5. 

Do not operate a chain saw in a tree.

 Operation 

of a chain saw while up in a tree may result in 

personal injury.

6. 

Always keep proper footing and operate the 

chain saw only when standing on fixed, secure 

and level surface.

 Slippery or unstable surfaces 

such as ladders may cause a loss of balance or 

control of the chain saw.

7. 

When cutting a limb that is under tension be alert 

for spring back.

 When the tension in the wood fibres 

is released the spring loaded limb may strike the 

operator and/or throw the chain saw out of control.

8. 

Use extreme caution when cutting brush and sap

-

lings.

 The slender material may catch the saw chain 

and be whipped toward you or pull you off balance.

9. 

Carry the chain saw by the front handle with 

the chain saw switched off and away from your 

body. When transporting or storing the chain 

saw always fit the guide bar cover.

 Proper 

handling of the chain saw will reduce the likelihood 

of accidental contact with the moving saw chain.

10. 

Follow instructions for lubricating, chain ten-

sioning and changing accessories.

 Improperly 

tensioned or lubricated chain may either break or 

increase the chance for kickback.