Makita LXT DUC303Z - Инструкция по эксплуатации - Страница 10

10 ENGLISH

11. 

Keep handles dry, clean, and free from oil and 

grease.

 Greasy, oily handles are slippery causing 

loss of control.

12. 

Cut wood only. Do not use chain saw for pur-

poses not intended.

 For example: do not use 

chain saw for cutting plastic, masonry or non-

wood building materials. Use of the chain saw for 

operations different than intended could result in a 

hazardous situation.

13. 

Causes and operator prevention of kickback:

Kickback may occur when the nose or tip of the 

guide bar touches an object, or when the wood 

closes in and pinches the saw chain in the cut. 

Tip contact in some cases may cause a sudden 

reverse reaction, kicking the guide bar up and 

back towards the operator. Pinching the saw chain 

along the top of the guide bar may push the guide 

bar rapidly back towards the operator. Either of 

these reactions may cause you to lose control of 

the saw which could result in serious personal 

injury. Do not rely exclusively upon the safety 

devices built into your saw. As a chain saw user, 

you should take several steps to keep your cutting 

jobs free from accident or injury.

Kickback is the result of tool misuse and/or incor-

rect operating procedures or conditions and can be 

avoided by taking proper precautions as given below:
• 

Maintain a firm grip, with thumbs and fingers 

encircling the chain saw handles, with both 

hands on the saw and position your body 

and arm to allow you to resist kickback 

forces. Kickback forces can be controlled by 

the operator, if proper precautions are taken. 

Do not let go of the chain saw.

► 

Fig.1

• 

Do not overreach and do not cut above 

shoulder height. This helps prevent unin-

tended tip contact and enables better control 

of the chain saw in unexpected situations.

• 

Only use replacement bars and chains spec

-

ified by the manufacturer. Incorrect replace

-

ment bars and chains may cause chain 

breakage and/or kickback.

• 

Follow the manufacturer’s sharpening and 

maintenance instructions for the saw chain. 

Decreasing the depth gauge height can lead 

to increased kickback.

14. 

Before starting work, check that the chain 

saw is in proper working order and that its 

condition complies with the safety regulations. 

Check in particular that:

• 

The chain brake is working properly;

• 

The run-down brake is working properly;

• 

The bar and the sprocket cover are fitted 

correctly;

• 

The chain has been sharpened and ten

-

sioned in accordance with the regulations.

15. 

Do not start the chain saw with the chain cover 

being installed on it.

 Starting the chain saw with 

the chain cover being installed on it may cause 

the chain cover to thrown out forward resulting in 

personal injury and damage to objects around the 

operator.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity 

with product (gained from repeated use) replace 

strict adherence to safety rules for the subject 

product. MISUSE or failure to follow the safety 

rules stated in this instruction manual may cause 

serious personal injury.

Important safety instructions for 

battery cartridge

1. 

Before using battery cartridge, read all instruc-

tions and cautionary markings on (1) battery char-

ger, (2) battery, and (3) product using battery.

2. 

Do not disassemble battery cartridge.

3. 

If operating time has become excessively 

shorter, stop operating immediately. It may 

result in a risk of overheating, possible burns 

and even an explosion.

4. 

If electrolyte gets into your eyes, rinse them 

out with clear water and seek medical atten-

tion right away. It may result in loss of your 

eyesight.

5. 

Do not short the battery cartridge:

(1) 

Do not touch the terminals with any con-

ductive material.

(2) 

Avoid storing battery cartridge in a con-

tainer with other metal objects such as 

nails, coins, etc.

(3) 

Do not expose battery cartridge to water 

or rain.

A battery short can cause a large current flow, 

overheating, possible burns and even a breakdown.

6. 

Do not store the tool and battery cartridge in 

locations where the temperature may reach or 

exceed 50 °C (122 °F).

7. 

Do not incinerate the battery cartridge even if 

it is severely damaged or is completely worn 

out. The battery cartridge can explode in a fire.

8. 

Be careful not to drop or strike battery.

9. 

Do not use a damaged battery.

10. 

The contained lithium-ion batteries are subject 

to the Dangerous Goods Legislation require-

ments. 

For commercial transports e.g. by third parties, 

forwarding agents, special requirement on pack-

aging and labeling must be observed. 

For preparation of the item being shipped, consult-

ing an expert for hazardous material is required. 

Please also observe possibly more detailed 

national regulations. 

Tape or mask off open contacts and pack up the 

battery in such a manner that it cannot move 

around in the packaging.

11. 

Follow your local regulations relating to dis-

posal of battery.

SAVE THESE INSTRUCTIONS.

CAUTION:

Only use genuine Makita batteries.

Use of non-genuine Makita batteries, or batteries that 

have been altered, may result in the battery bursting 

causing fires, personal injury and damage. It will 

also void the Makita warranty for the Makita tool and 

charger.