Makita LXT DUC303Z - Инструкция по эксплуатации - Страница 12

12 ENGLISH

Indicating the remaining battery 

capacity

► 

Fig.4:

1.

 Check button 

2.

 Capacity indicator

The remaining battery capacity is shown while you 

are pressing the check button. The capacity indicators 

correspond to each battery.

Capacity indicator status

Remaining 

battery 

capacity

On

Off

Blinking

50% to 100%

20% to 50%

0% to 20%

Charge the 

battery

Indicating the remaining battery 

capacity

Only for battery cartridges with the indicator

► 

Fig.5:

1.

 Indicator lamps 

2.

 Check button

Press the check button on the battery cartridge to indi-

cate the remaining battery capacity. The indicator lamps 

light up for few seconds.

Indicator lamps

Remaining 

capacity

Lighted

Off

Blinking

75% to 100%

50% to 75%

25% to 50%

0% to 25%

Charge the 

battery.

The battery 

may have

malfunctioned.

NOTE:

 Depending on the conditions of use and the 

ambient temperature, the indication may differ slightly 

from the actual capacity.

Main power switch

WARNING:

Always turn off the main power 

switch when not in use.

To stand by the chain saw, press the main power switch 

until the main power lamp lights up. To turn off, press 

the main power switch again.

► 

Fig.6:

1.

 Main power switch

NOTE:

 The main power lamp brinks if the switch 

trigger is pulled under unoperatable conditions. The 

lamp blinks if you

• 

turn on the main power switch while holding 

down the lock-off lever and the switch trigger;

• 

pull the switch trigger while the chain brake is 

applied;

• 

release the chain brake while holding down the 

lock-off lever and pulling the switch trigger.

NOTE:

 This chain saw employs the auto power-off 

function. To avoid unintentional start up, the main 

power switch will automatically shut down when the 

switch trigger is not pulled for a certain period after 

the main power switch is turned on.

Switch action

WARNING:

For your safety, this tool is 

equipped with lock-off lever which prevents the 

tool from unintended starting. NEVER use the tool 

if it runs when you simply pull the switch trigger 

without pressing the lock-off lever. Return the 

tool to our authorized service center for proper 

repairs BEFORE further usage.

WARNING:

NEVER tape down or defeat pur-

pose and function of lock-off lever.

CAUTION:

Before installing the battery car-

tridge into the tool, always check to see that the 

switch trigger actuates properly and returns to 

the "OFF" position when released.

NOTICE:

Do not pull the switch trigger hard with-

out pressing the lock-off lever. This can cause 

switch breakage.

To prevent the switch trigger from being accidentally 

pulled, a lock-off lever is provided. To start the tool, 

depress the lock-off lever and pull the switch trigger. 

Release the switch trigger to stop.

► 

Fig.7:

1.

 Switch trigger 

2.

 Lock-off lever