Zigmund & Shtain EN 116.622 W - Инструкция по эксплуатации - Страница 19

EN

BUILT-IN ELECTRIC OVENS

INSTALLATION, USE AND MAINTENANCE INSTRUCTIONS

17

Automatic operation (with deferred 

cooking start setting)

This function allows cooking duration to be 

programmed, also setting the start time. Also in 

this case,  it is not possible to use the food probe 

(where envisioned).

To activate automatic cooking, select the desired 

oven function from the menu and adjust the 

cooking temperature. By touching the symbol 

0:00

 of the timer will start to flash. Adjust the 

desired cooking duration time (the 

AUTO 

symbol 

will appear). Press on the 

, symbol, the flashing 

cooking end time envisioned by the duration 

time entered appears. Operate on   and   

to set the desired cooking end time. Press   to 

activate programming. The function, temperature 

and cooking end time symbols appear on the 

display. A flashing arrow near to the temperature 

will indicate that cooking has started. 

An acoustic signal will inform of end of cooking, 

press on   to interrupt the signal. To interrupt 

cooking, press on  , 

PAUSE

, will appear. Press a 

second time on   to annul the program.

Timer function

With this function it is possible to activate a timer 

that will signal when the time set has expired.

Press lightly several times on the  , symbol until 

the  flashing 

 symbol appears along with 

0:00

on the timer.

Adjust the desired minutes by operating on 

 and  . When the time set has passed, an 

acoustic signal, which will last for approx. 7 

minutes, will inform you that the time has expired. 

To stop the acoustic symbol, operate on   or  .

Alarm clock function

Premere leggermente più volte sul simbolo   

fino a che non appare lampeggiante il simbolo 

assieme all’orario del giorno. A questo punto con 

 e   regolate l’ora del giorno in cui desiderate 

essere avvisati dalla sveglia. Trascorso il tempo 

impostato un segnale acustico che durerà 

per circa 7 minuti vi avviserà che il tempo è 

scaduto. Per fermare il segnale acustico agire 

indifferentemente su   o   .

Core probe function (in models set-up)

The Core Probe is a sensor that can be connected 

inside the oven and inserted inside the dish to be 

cooked.  The use of this probe allows automatic 

interruption of cooking when the inside of the 

food reaches the desired temperature.

To activate it, select the desired function and, if 

necessary, modify the temperature that appears 

by  default  (see  the  “Modifying  the  temperature 

assigned to the function” paragraph).

Press the   key. The pre-set value of the 

programmed temperature for the probe appears 

flashing  in  the  two  numbers  on  the  right  of  the 

timer (with this function, the timer display is used 

to show the core probe temperatures). The word 

AUTO

. also appears.  Set the temperature desired 

for the inside of the food from the values between 

20/99°C by operating on the   or  .

Press the 

GO

, key 

PAUSE

 switches off and cooking 

starts. The current temperature is visible on the 

numbers on the left while the temperature that 

you have set is visible on the right-hand numbers 

of the timer display.

Fast heating function (for some 

functions only)

This function allows faster oven pre-heating.

After having selected the desired cooking 

function, press the   button. The elements most 

suitable for quickly reaching the set temperature 

are activated and the   symbol can be seen on 

the display, which will disappear as soon as the 

temperature is reached. The program will also 

emit a warning sign. At this point, the system will 

state the previously set functions as active.

Fast heating cannot be activated with the 

GRILL

 function, when the difference between 

temperature set and that to be reached is lower 

than 50°C and when the temperature to reach is 

lower than 100°C.